ES 1200 / ES 2500
2Pages

PRODUCT DATA SHEET ES SERIES Safe and effective exhaust particulate removal solution for TEM owners. FEATURES and BENEFITS ++ Engineered to meet the needs of thermal deburring machine users. ++ Interlocked with TEM machine controls.* Leading manufacturers concerned about a clean planet are proactively implementing this Kennametal integrated solution for separating the oxide particulate normally expelled to the outdoors from thermal deburring machines. The ES-1200 and ES-2500 models utilize wet filtration technology avoiding any possibility of dry dust collection explosion hazards. 99.9% efficiency is achieved with the engineered water stream and optional HEPA filter removing nearly all particulate 0.3 microns and larger. ++ Portable. ++ 99.9% efficient with optional HEPA filter (particulate >0.3 micron). ++ Stainless steel construction. ++ Marine-grade powder coated finish, inside and out. ++ Automatic water level control. ++ Simple cleaning by manual rake or optional bottom drain. ++ Static pressure-sensing airflow control indicates when filter change is needed. ++ Simple maintenance – no special tools or skills required. * efers to new machines. For older installed TEM machines, R the control system would require compatibility assessment by our service deptartment.

TECHNICAL INFORMATION ELECTRICAL SPECIFICATIONS Exhaust air from a thermal deburring machine enters the collector through ducting at the rear of the collector cabinet. Exhaust air is forced into a water bath and exits via baffles with engineered water streams that drop out and filter the oxide particulate laden air. The particulate is contained in the bottom of the collector for easy removal at necessary intervals. Water level is automatically maintained through our engineered flow valve system that is interlocked to the thermal deburring equipment.* Suitable for the Following Kennametal...