iWAP400 Zone 1 USB to Wi-Fi Adapter Connect PC’s to an 802.11b/g WLAN using a USB port Intrinsically Safe RF outputs for connection to wide range of antennas II 2(1) G Ex e mb [ia] IIC T4 -20°C to + 60°C IP66 USB 2.0 compatible Overview The iWAP400 is a zone 1 encapsulated and increased safety USB to Wi-Fi adapter. The Antenna RF output from the iWAP400 is intrinsically safe and therefore can be used with Extronics range of iANT200 antennas. The iWAP400 is housed in a rugged aluminium enclosure making it suitable for mounting in a wide range of areas. The enclosure is epoxy coated and IP rated so can therefore be installed outdoors in harsh environments. The iWAP400 uses a Wi-Fi Certified transmitter module, which gives a maximum of 31.5mW of intrinsically safe output power and the device supports 802.11b/g standard. Used in conjunction with the iANT207 up to 80mW EIRP is available giving excellent wireless coverage. The iWAP400 is powered via a standard USB port, enabling devices such as PCs to communicate wirelessly with an 802.11b/g WLAN. Features and Benefits Enable any PC to have WiFi For enabling explosion proof panel PCs, purge PCs or any PC based device with a USB port to be connected to a WiFi network Intrinsically Safe RF Output The intrinsically safe RF output means that a wide range of antennas may be connected. For use in zone 1 and zone 2, the Extronics range of iANT200 antennas may be used. Compact Design The compact design of the iWAP400 means it may be mounted into most manufacturers PC terminal enclosure systems. Specification Refer overleaf for iWAP400 specifications. Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: [email protected] Web: www.extronics.com

Specification Power Supply Host Interface Maximum USB Cable Length Standard Cable—USB 1.1 = 3m, USB 2.0 = 5m High Quality Cat-6—USB 1.1 = 10m, USB 2.0 = 5m Power Consumption Data Rates Typical Receive Sensitivity Note: The data rates above are only applicable if using a USB 2.0 port. If using a USB1.1 port the maximum throughput, using 802.11b or 802.11g, will typically be < 4Mbps at layer 3 -80dBm @ 11Mbps -65dBm @ 54Mbps Typical Transmit Power Security Encryption and Authentication WEP 64/128, TKIP, AES, WPA, WPA2, 802.11e, 802.11i security specifications, Advanced Encryption Standard (AES)...