1. Catalogs
  2. Extronics Ltd
  3. Zone 1/ 21 Battery Box BKEx
video corpo

Zone 1/ 21 Battery Box BKEx

Zone 1/ 21 Battery Box BKEx

Zone 1/ 21 Battery Box BKEx

Product catalog summary
Specifications
The BK-EX Battery Box is housed in stainless steel (1.4301) and offers IP65 protection, making it dustproof and splash-water protected. It weighs approximately 15 kg and operates at either 12VDC or 24VDC with a capacity of 20Ah at 12VDC or 10Ah at 24VDC. The battery box uses two lead acid gel rechargeable batteries (Type Dryfit A 512/10.0 S) and features a 2-pin jack connection (Type GHG 542 5210 V0). The ambient temperature range for operation is -20°C to +50°C, and for storage, it is -30°C to +60°C. The maximum charging/discharge current is 8A, and it takes approximately 12 hours to fully charge. Charging must occur in a safe area only.

ATEX Certification
The battery box is ATEX certified with the following specifications: TUV EX5 01 11 38033 014, II 2 G EEx ed IIC T6, and II 2 D T80°C.

Recommendations
To avoid battery damage by deep discharge, the recommended under-voltage cut-off level is 10.5V for a 12V battery pack and 21V for a 24V battery pack.

Overview
The BK-EX is a rugged stainless steel rechargeable battery enclosure designed for use in Zone 1 & 21 hazardous areas. It is suitable for both mobile and fixed applications and includes an ATEX certified outlet socket for easy equipment connection. The enclosure cannot be recharged in hazardous areas.

Product Variants
- BK-EX Zone 1/21 Battery Enclosure (24V Battery, 10Ah, Stainless Steel Housing with Handle, Outlet Socket, IP65) - Part Number: 4640-358
- BK-EX Zone 1/21 Battery Enclosure (12V Battery, 20Ah, Stainless Steel Housing with Handle, Outlet Socket, IP65) - Part Number: 4640-352

Charger Information
- Charger for BK-EX-24v: Part Number 4911-228, plastic housing with dimensions L=135 mm, W=100 mm, H=76 mm, protection type IP 20, mains connection 230 VAC, 50/60 Hz, charging current 5A, with Europa plug. Intended for operation in a safe area only.
- Charger for BK-EX-12v: Part Number 4911-362, plastic housing with dimensions L=135 mm, W=100 mm, H=76 mm, protection type IP 20, mains connection 230 VAC, 50/60 Hz, charging current 1A, with Europa plug. Intended for operation in a safe area only.

Contact Information
Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU. Tel: +44 (0) 845 277 5000, Fax: +44 (0)845 277 4000, E-mail: [email protected], Web: www.extronics.com
See more

Catalog excerpts

Zone 1/ 21 Battery Box BKEx-1

BK-EX Battery Box Stainless Steel Battery Enclosure for use in Zone 1 & 21 Hazardous Areas. II 2G EEx ed IIC T6 II 2D T80ºC Overview A rugged stainless steel rechargeable battery enclosure for use in the hazardous area. The enclosure can be used in mobile or fixed applications and is fitted with an ATEX certified outlet socket for easy connection to the equipment. The enclosure cannot be recharged in the hazardous area. Specification Housing IP65 dustproof and splash-water protected Rechargeable Batteries 2 x Lead Acid Gel, Type Dryfit A 512/10.0 S Ambient Temperature Range Fully Charged Time Recommended Under Voltage cut 12v battery pack - 10.5V off Level. (To avoid battery damage 24v battery pack - 21v by deep discharge) Charging Environment Safe Area Only ATEX Certification Copyright © Extronics Ltd 2009 The information contained in this document is subject to change without notice. Extronics cannot be held responsible for any errors or inaccuracies within this document. 326704 Issue 6 Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: [email protected] Web: www.extronics.com

 Open the catalog to page 1
Zone 1/ 21 Battery Box BKEx-2

Ordering Information Description Part Number BK-EX Zone 1/21 Battery Enclosure (24V Battery, 10Ah, Stainless Steel Housing with Handle, Outlet Socket, IP65) BK-EX Zone 1/21 Battery Enclosure (12V Battery, 20Ah, Stainless Steel Housing with Handle, Outlet Socket, IP65) BK-EX Battery Charger Outlet Plug Charger for BK-EX-24v 4911-228 Plastic housing, L=135 mm, W=100 mm, H=76 mm. Protection type IP 20. Mains connection 230 VAC, 50/60 Hz, charging current 5A, with Europa plug. Output side fitted with explosion-proof plug, intended for operation in a safe are ONLY. Charger for BK-EX-12v 4911-362 Plastic...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.