iWAP300 Universal Industrial Access Point Enclosure Universal Access Point enclosure system to allow standard WLAN hardware to be installed in harsh, wet, and corrosive environments Industrially hardened -40ºC/-20ºC/-10ºC/ to 60ºC (note that this depends on the internal hardware used or if the enclosure cooling / heating option is fitted) IP66 protection Overview The iWAP300 Universal Industrial Access Point Enclosure is designed to deploy wireless networks in harsh, wet and corrosive environments. The concept allows installation of equipment from leading WLAN vendors such as AeroScout, Meru, Motorola, Cisco, Firetide and many others. Each type of Access Point or RF transmitting device is rigorously checked and tested by Extronics to ensure that the vendors equipment is suited. This means that you can effectively use the vendor of your choice when you want to extend your WLAN to your plant areas where protection against the elements is essential. The Extronics iWAP300 is designed for use with Extronics extensive range of antennas for optimum coverage. Optional features include surge arrestors for lightening suppression in outdoor installations and either single mode or multimode fibre inputs for the Ethernet link distance extension, enclosure heating or cooling for low/ Features and Benefits OEM Hardware Platform Providing the WLAN Access Point or RF hardware is within certain size and power dissipating constraints we can install the hardware in our factory. See list overleaf for current models. Rugged Enclosure Custom enclosure with IP66 ingress protection made from 316L stainless steel for installation in extremely arduous environments. Future Proof Infrastructure As new hardware becomes available it can be assessed by Extronics for compliance to the certification and the existing hardware can be replaced with the new version meaning you are installing a future proof solution. Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: [email protected] Web: www.extronics.com

Specification Power Supply Maximum Power Consumption Without heating or cooling POE 802.3af or 16W for mains or DC power With cooling 21W With heating and cooling 121W Enclosure Material Ingress Protection Typical Operating Temperature (actual temperature range dependant upon access point used, see overleaf): Without heating or cooling –20oC to 500C With cooling –20oC to 600C With heating and cooling –40oC to 600C Storage temperature; –40oC to 700C Relative humidity; 0 to 95%, non condensing Note: If fibre option chosen the minimum ambient temperature is 0oC. If a lower ambient temperature is...

Ordering Information iWAP300 Universal Access Point Enclosure Specify option [#1] - Wireless Network Hardware Hardware supplied by customer* Hardware supplied by Extronics Specify option [#2] - Type Of Wireless Network Hardware Acksys WLG-LINK-OEM (No heating/Cooling: -20oC to 60oC, with heating/cooling -40oC to 70oC) Firetide 7000 Series MESH Router (No heating/Cooling: 0oC to 50oC, with heating/cooling -40oC to 60oC) AeroScoout Location Receiver (No heating/Cooling: 0oC to 50oC, with heating/cooling -40oC to 60oC) Cisco AIR-CAP3502E / AIR-CAP3501E (No heating/Cooling: -20oC to 45oC, with heating/cooling...