Universal Gas Detection System iGAS100
1 / 2Pages

iGAS100 Universal Gas Detection System Zone 1 Series of Gas Detectors. With a range of gas sensors and flexible enclosure options Explosion Proof II 2GD Ex d IIC T6 Ex tD A21 IP68 T85°C -20°C to +40°C IP68 Overview The iGAS100 series of gas detectors are designed to provide an accurate, cost effective and reliable gas detection solution. The range incorporates a number of sensing technologies, each of which can be utilised in a variety of enclosure options to provide the most effective detection solution. Utilising microprocessor technology the iGAS100 series provides a stable process signal output, and allows for a 4-20mA or digital addressable output signal. The digitally addressable sensors are installed on a single cable run, which dramatically reduces installation costs. The iGAS100 series of sensors can be combined with the iGAS700 controller for remote display and calibration. The integrated processor can be used to pre-calibrate the sensor prior to installation. Alternatively calibration can be achieved on site via the Extronics control panel or locally using a handheld PC device or laptop. Outputs available include 4—20mA or Volt Free Contacts. Rugged Enclosure Custom enclosure ingress protection. Certification Number Certification Type 110 Diameter x 127 High Plus Detector Option Multiple Gas Detection Options A range of gas detection solutions giving flexibility in sensor deployment. Flexible Outputs Output options allowing for integration into most control systems System Integration iGAS100 sensors integrate with the iGAS700 controller, or with local control panels utilising the sensors output options. Exd Architecture Exd connections and terminations allow for the sensors and controllers to be used without barriers. Optional In Situ Insertion Probe Optional in situ solvent monitor probe suitable for monitoring a wide range of industrial applications including ovens, dryers and exhaust feeds. Ambient Temperature Operating Humidity Range 5-60% RH For Toxic Sensor 0-95% RH Non Condensing For Others Operating Voltage Sensor Dependant Zero Drift Sensor Dependant Response Time Sensor Dependant Cable Entries Enclosure Material Epoxy Coated Aluminium Alloy. Sensor Material Addressable Detectors For large area coverage addressable detectors are available which can reduce installation costs of up to 60% by utilising a four core common cable. 317828 Issue 9 Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: info@extronics.com Web: www.extronics.com

Ordering Information iGAS100 Hazardous Area Gas Detectors Specify Option [#1] - Sensor Type Toxic Infrared Pellistor Specify Option [#2] Junction Box Type Exd junction box with 4-20mA output only (not suitable for stand alone pellistor) Exd junction box with digitally addressable output Exd junction box with display, 4-20mA output and local alarm relays Exd junction box with local display and 4-20mA output Exd junction box with digitally addressable output and local display Specify Option [#3] Gas Detector type Oxygen Flammability (please specify specific gas to be detected on any...