iUPS101
4Pages

iUPS101 Uninterruptible Power Supply • ATEX Zone 1 certified • Provides back up power for critical equipment in hazardous areas • Modular design, allowing for added back up time • Rugged IP66/45 system for industrial environments Protect critical equipment The iUPS101 provides reliable back up power to ensure that vital equipment such as instrumentation and control systems, navigation or landing lighting, and blow out prevention systems - remain operational in the event of a blackout or brownout. Modular design Designed to be wall mounted, the iUPS101 UPS system includes an aluminium alloy Ex d charger/inverter enclosure, a stainless steel Ex e terminal enclosure, and a stainless steel iBATT100 Ex e battery enclosure containing maintenance-free valve regulated lead acid batteries. Easy installation and configuration Extended back up power Access to incoming and outgoing cables is easy - the Ex The modular design allows integration of e enclosure is close coupled to the Ex d enclosure via additional battery packs for added back up cable bushings, so there is no need to open the Ex d time – up to 87 minutes with a 3kVA load enclosure. The Ex d enclosure has a glass window to at 20°C. The iUPS101’s modular design also show alarm and status information, and comes allows 2 complete additional iUPS101 units complete with door mounted Ex d buttons to configure to be attached, creating a system that can the UPS display and program the two volt free auxiliary support a maximum load of 9KVA. contact to use system or alarm information. The iUPS101 also includes advanced battery charge control for increased battery life. Extronics Limited 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: info@extronics.com Web: www.extronics.com Copyright © Extronics Ltd 2016 . The information con tain ed in this docu ment is subject to c hange without notic e. Extronics cannot b e held responsible for any errors or inaccuracies within th is

Housing Ex d enclosure: aluminium alloy Ex e close coupled enclosure: stainless steel Ex e battery enclosure: stainless steel Ingress protection Ex d enclosure: IP66 Ex e close coupled enclosure: IP66 Ex e battery enclosure: IP45 (non-Ex rating), IP43 (Ex rating) Weight Ex d enclosure + Ex e close coupled enclosure: 90 kg Ex e battery enclosure: 122 kg Operating temperature -20oC to 55oC @ 500VA See ambient de-rating table for further details Relative humidity 0 to 95% non-condensing Input mains power supply 230V iUPS101: 180-265VAC (45-65Hz) 120V iUPS101: 90-150VAC...

* After running for approximately 20mins at full load above 20°C, the max output power available can reduce by up to 15% Ambient de-rating table Max external ambient System run times are based on battery manufacturers' data and Extronics cannot be held responsible for any discrepancies. Run times will reduce below 20°C. Extronics Limited 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: info@extronics.com Web: www.extronics.com Copyri ght © Extronics Ltd 2016. The information contained in this document is subject to...

2 Batteries in Series Ordering Information: iUPS101-[#1] -[#2] -[#3] -[#4] -[#5] Specify option [#1] - battery voltage 24V DC (Standard run-time) 24 Specify option [#2] - rated output power 500 VA 05 Specify option [#3] - AC voltage 230 VAC 23 Specify option [#4] - AC frequency 50 Hz 50 Specify option [#5] - remote e-stop Remote e-stop disabled (default) N Remote e-stop enabled (user must supply 24-48VDC power to remote e-stop circuitry) Y Copyri ght © Extronics Ltd 2016. The information contained in this document is subject to change without notice. Extronics...