iSOLATE-CT N-Type Connector Transit Explosion proof connector transit for quick and easy installation of antennas in hazardous areas. I M2 Ex d I Mb Class I,II,III, Division 1, Groups A-G Class I, Zone 1 Ex d IIC Gb Class I, Zone 21 Ex tb IIIC Db The iSOLATE-CT is designed for use with the iSOLATE500 range of galvanic RF isolators to enable quick & simple wireless deployments in hazardous areas. When fitted to an explosion proof enclosure containing the Extronics iSOLATE500, the RF ports of standard wireless radio device are protected by the intrinsic safety concept, facilitating their use in Zone 1 / Division 1 environments. By the use of an IP66 industry standard ‘Type N’ RF connector, the need to make off cable glands is eliminated and installation made simple. Users no longer have to use a limited range of certified antennas and can quite simply live connect & disconnect the wireless antenna of their choice e.g. Extronics iANT200 range of high quality rugged outdoor antennas, which are IP66 for the most extreme and arduous environments. Any antennas not listed in the Extronics range must be assessed by the user to ensure they meet the requirements for installation of non-electrical equipment in hazardous areas. The iSOLATE-CT must be used with suitably rated ATEX/IECEx approved intrinsically safe apparatus or associated apparatus, appropriate for the Zone in which the equipment is to be installed. Features & Benefits Small Compact Design Easy installation—screws directly into the wall of any Ex’d’ enclosure. Certification Type Quick to install No specialist tools required— antennas or cables screw directly onto the N-type connector Extended Temperature Range Operating temperature range of -60°C to +150°C for the most extreme environments. Future Proof Infrastructure As plant layout / infrastructure changes, new higher performance antennas can simply be swapped for old hardware 1 meaning the user is installing a future proof solution. Class I,II,III, Division 1, Groups A-G Class I, Zone 1 Ex d IIC Gb Class I, Zone 21 Ex tb IIIC Db Construction Material Nickel Plated Brass Ingress Protection Ambient temperature: -60ºC to +150ºC Relative humidity; 0 to 95%, non condensing Dimensions (body) / Weight Internal RF Connection: External RF Connection: SMA Female N-Type Female Thread Type Insertion Loss (typical): ATEX TRAC14ATEX0065X IECEx IECEx TRC 14.0024X MET Pending Please note it is the customers responsibility to ensure the maximum values for RF Threshold power as per Table 4.0 of EN 60079-0: 2012 are not exceeded. The maximum RF output of the wireless transmitter and antenna gain must be taken into account when installing equipment. Ordering Information Description Order Code Explosion proof RF connector transit, M20 thread and N-Female connector. Explosion proof RF connector transit, 3/4” NPT thread and N-Female connector. Associated Components iANT200 range of hazardous area antennas—See product datasheets for more information. 900MHz Intrinsically Safe RF Galvanic Isolator with female SMA connectors. 2400MHz Intrinsically Safe RF Galvanic Isolator with female SMA connectors. 5000MHz Intrinsically Safe RF Galvanic Isolator with female SMA connectors. 2400MHz & 5000MHz Dual Band Intrinsically Safe RF Galvanic Isolator with female SMA connectors. Copyright © Extronics Ltd 2014 The information contained in this document is subject to change without notice. Extronics cannot be held responsible for any errors or inaccuracies within this document. Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU