Dual Polarised Directional Hazardous Area Antenna iANT219
3Pages

iANT219 Directional Dual Polarised WiFi Rugged Antenna 2.4GHz, 5GHz sector antenna combining vertical and cross polarised antennas in one complete package. Suitable for Groups II, III -55°C to +65°C Simple Apparatus IP67 Note (The supplied antenna contains aluminium and as such must not be used in Group I, Zone 0 or Ga environments) The iANT219 is a rugged antenna for use in hazardous areas. It is suitable for either indoor or outdoor use, and optimised for use in WLAN installations in the 2.4GHz/5.8GHz spectrum for IEEE802.11 b/g/n/ac wireless networks or 2.4GHz/5.8GHz wireless mesh Ethernet networks. The iANT219 combines vertical / cross polarised antennas in one package, allowing the latest enterprise class MIMO wireless hardware to be installed with just one antenna. Indoor and Outdoor operation-The iANT219 is suitable for both indoor and outdoor operation, as it is made from durable UV resistant plastic, with good thermal shock resistance. Rated to IP67 and –55C to +65°C it can be used in every climate without concerns. Gain and Directionality-The iANT219 offers a gain of up to 12.5/16 dBi With a directional pattern, it is ideally suited for use in enterprise class 802.11n/ac wireless applications that require either 2.5GHz or 5GHz coverage for all antenna ports in a single package. Please Note: The iANT2xx range of antennas is classed as “Simple Apparatus” under international intrinsic safety standards. IEC 60079-25 requires that simple apparatus equipment used in an intrinsically safe electrical system is compliant with IEC 60079-0, IEC 60079-11, IEC 60079-14 & IEC 60079-25. Extronics has assessed the iANT2xx antenna range together with our intrinsically safe certified wireless products to provide solutions compliant to all relevant standards. Therefore iANT2xx antennas can be deployed in a hazardous area, as part of an Extronics system, without the need to undergo further assessment. Compliance is also maintained if an iANT2xx antenna is used with the Extronics iSOLATE500 RF galvanic isolator. If the antenna is not to be used with Extronics’ products, then the system designer must assess the hazard and demonstrate compliance to the relevant standards. Diagrammatical Data Vertical Polarisation (2.5GHz) Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: info@extronics.com Web: www.extronics.com

Radiation Pattern E-Plane (5.5GHz) Diagrammatical Data Horizontal Polarisation (2.5GHz) Extronics Ltd., 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail: info@extronics.com Web: www.extronics.com

Specification Antenna Polarization, Dual Pole Linear, (Vertical & Horizontal) Port to Port Isolation Front to Back Ratio, min Input Impedance Lighting Protection Back Plane Aluminium; protected through chemical passivation Aluminium; protected through chemical passivation Supplied with aluminium wall mounting bracket Supplied with aluminium wall mounting bracket Operating Temperature Range Wind Load Ordering Information Description 2.4GHz Dual Polarised Directional Antenna 5GHz Dual Polarised Directional Antenna Accessories RF cable assembly 1m, N Type Crimp Plug Nickel to N Type Crimp Plug...