Catalogs >
Extreme Networks >
Summit X670-G2

Summit X670-G2
11Pages

Catalog excerpts

DATA SHEET Summit X670-G2 Series Scalable Advanced 10Gb Aggregation and Data Center Switch with ExtremeXOS™ Modular Operating System BENEFITS BUSINESS ALIGNMENT • X670-G2-48x-4q – 48 ports of 1/10Gb SFP+ with 4 ports of 10/40Gb QSFP+ • X670-G2-72x – 72 ports of 1/10Gb SFP+ in 1 RU form factor OPERATIONAL EFFICIENCY • Full ExtremeXOS® feature set supporting switching, routing, SDN, Data Center Bridging, MPLS, and Audio Video Bridging • SummitStack™ support enables flexible Product Overview The Summit X670-G2 product family provides high density 10 Gigabit Ethernet and 40 Gigabit Ethernet switching in a small 1RU form factor. With its versatile design, the Summit X670-G2 provides high density Layer 2/3 10Gb networking with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast routing to stacking configurations with entire enable enterprise aggregation and core backbone deployment in AC-powered and stackable Summit product line DC-powered environments. • IEEE 1588 PTP Timing with integrated timing output ports • All configurations provide non-blocking, line rate performance The Summit X670-G2 simplifies network operation with the ExtremeXOS modular operating system (OS), which is used among all Extreme Networks Summit and BlackDiamond Ethernet switches. The high availability ExtremeXOS operating system provides simplicity and ease of operation through the use of one OS • Low latency cut-through mode The Summit X670-G2 comes in two models: • X670-G2-48x-4q – 48 ports of 1/10Gb SFP+ with 4 ports of 10/40Gb QSFP+ • X670-G2-72x – 72 ports of 1/10Gb SFP+ in 1 RU form factor The Summit X670-G2-48x-4q supports four QSFP+ ports of 40 GbE. Each 40 Gigabit Ethernet port can be independently configured as 40 Gigabit Ethernet or 4 x 10 Gigabit Ethernet. The X670-G2-72x model supports 72 ports of native 1Gb/10Gb SFP+ ports in a single compact system without the requirement to use break-out cables to achieve high density 10Gb connections. High-Performance Stacking The Summit X670-G2 supports 4 different methods of stacking: SummitStack-V, SummitStack-V80, SummitStack-V160, and SummitStack-V320. SummitStack-V—Flexible Stacking Over 10 Gigabit Ethernet ExtremeXOS supports the SummitStack-V capability using 2 of the native 10 GbE ports on the faceplate as stacking ports, enabling the use of standard cabling and optics technologies used for 10 GbE SFP+, SummitStack-V provides long-distance stacking connectivity of up to 40 km while reducing the cable complexity of implementing a stacking solution. SummitStack-V is compatible

Open the catalog to page 1

with Summit X440, X460, X460-G2, X480, X670, X670V and X770 switches running the same version of ExtremeXOS. SummitStack-V enabled 10 GbE ports must be physically direct-connected. SummitStack-V80/V160/V320—Flexible Stacking Over 40 Gigabit Ethernet GREEN DESIGN – LOW POWER CONSUMPTION WITH OPTIMIZED COOLING OPTIONS The Summit X670-G2 series is designed to be environmentally green. System power consumption is very low at both highload and idle situations through the power-efficient hardware design. The power supplies are also highly efficient, which minimizes the loss of power and...

Open the catalog to page 2

SOFTWARE DEFINED NETWORKING (SDN) OPENFLOW ExtremeXOS implementations of OpenFlow APIs allow an external OpenFlow-based SDN controller to access and control the forwarding plane of ExtremeXOS network devices. ExtremeXOS-based switches offer a programming interface through OpenFlow to enable a high degree of automation in provisioning network services for many upper layer businesscritical applications running the OpenFlow-based SDN controller. OPENSTACK ExtremeXOS-based switches also allow for integration with the OpenStack open source cloud computing platform for public and private clouds...

Open the catalog to page 3

MPLS On the Summit X670-G2 series switches MPLS can be enabled, if needed, by way of an optional feature pack. MPLS provides the ability to implement traffic engineering and multi-service networks, and improve network resiliency. The MPLS protocol suite provides the ability to deploy services based on L2VPNS (VPLS/VPWS), BGP-based L3VPNS; LSP Establishment based MULTI-SWITCH LAG (M-LAG) M-LAG can address bandwidth limitations and improve network resiliency, in part by routing network traffic around bottlenecks, reducing the risks of a single point of failure, and allowing load balancing...

Open the catalog to page 4

Threat Detection and Response CLEAR-FLOW SECURITY RULES ENGINE CLEAR-Flow Security Rules Engine provides first-order threat detection and mitigation, and mirrors traffic to security appliances for further analysis of suspicious traffic in the network. SFLOW Summit X670-G2 series supports hardware-based sFlow® sampling that provides the ability to sample application-level traffic flows on all interfaces simultaneously. PORT MIRRORING To allow threat detection and prevention, Summit X670-G2 supports many-to-one and one-to-many port mirroring. This allows the mirroring of traffic to an...

Open the catalog to page 5

GENERAL SPECIFICATIONS PHYSICAL SPECIFICATIONS Summit X670-G2-48x-4q - 1280Gbps switch bandwidth, 952Mpps forwarding rate Summit X670-G2-72x - 1440Gbps switch bandwidth, 1071Mpps forwarding rate 9216 Byte maximum packet size (Jumbo Frame) Store-and-Forward and Cut-Through switching support Less than 600 nanoseconds latency 128 load sharing trunks, up to 32 members per trunk 4096 VLANS (Port, Protocol, IEEE 802.1Q) 4096 ingress and 1024 egress ACL rules per switch FORWARDING TABLES OPERATING SPECIFICATIONS Operating Temperature Range: 0° C to 45° C (32° F to 113° F) Operating Humidity: 10%...

Open the catalog to page 6

EMI/EMC STANDARDS POWER SUPPLY SPECIFICATIONS PHYSICAL SPECIFICATIONS POWER SPECIFICATIONS Voltage input range 90 to 264 V Nominal input ratings 100 to 240 V, 50 to 60 Hz, 8 A ETSI EN 300 386 v1.6.1, 2012-09 (EMC Telecommunications) 2004/108/EC EMC Directive Nominal input current at full loads • 7.5 A @ 90 V (low-line) • 3.7 A @ 230 V (high-line) Line frequency range 47 to 63 Hz CISPR 22: 2008, (Ed 6.0) Class A (International Emissions) Maximum inrush current 15 A CISPR 24:2010 Class A (International Immunity) Output 12 V, 45 A max, 540 Watts 3.3 V, 3 A max, 9.9 Watts IEC/EN 61000-4-2:2009...

Open the catalog to page 7