Summit-X670-DS
10Pages

{{requestButtons}}

Catalog excerpts

Summit-X670-DS - 1

DATA SHEET HIGHLIGHTS The Summit X670 series switches are purpose-built top-of-rack switches designed to support emerging 10 Gigabit Ethernet-enabled servers in enterprise and cloud data centers. Summit X670 helps optimize new server deployments with its optional, future-proofing 40 GbE uplink support while providing seamless support from existing Gigabit Ethernet-based servers to 10 GbEbased high-performance servers to start the transition to the new virtualized environment. Product Overview The Summit X670 series is available in two models: Summit X670V and Summit X670. Summit X670V provides high density for 10 Gigabit Ethernet switching in a small 1RU form factor. The switch supports up to 64 ports in one system and 448 ports in a stacked system using high-speed SummitStack-V160, which provides 160 Gbps throughput and distributed forwarding. The Summit X670 model provides up to 48 ports in one system and up to 352 ports in a stacked system using SummitStack-V technology. With its versatile design, the Summit X670 series provides high density Layer 2/3 switching with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast routing to enable enterprise aggregation and core backbone deployment in AC-powered and DC-powered environments. Summit X670 series simplifies network operation with the ExtremeXOS modular operating system (OS), which is used amongst all Extreme Networks Summit and BlackDiamond Ethernet switches. The high availability ExtremeXOS operating system provides simplicity and ease of operation through the use of one OS everywhere in the network. 10 GIGABIT ETHERNET SWITCHING The Summit X670 model offers 48-port 10 Gigabit Ethernet non-blocking switching with 10GBASE-X SFP+ interfaces. Summit X670 is capable of Layer 2 and Layer 3 forwarding at up to 714 million packets per second forwarding rate in a small 1RU form factor, enabling next-generation high-performance server deployment in data centers. Both models support SummitStack-V high-speed, longer distance stacking. SummitStack-V: Flexible Stacking Over 10 Gigabit Ethernet SummitStack-V capability utilizes 10 GbE ports as stacking ports, enabling the use of standard cabling and optics technologies used for 10 GbE such as XFP, SFP+, 10GBASE-T and XENPAK. SummitStack-V provides long-distance stacking connectivity of up to 40 km while reducing the cable complexity of implementing a stacking solution. SummitStack-V enabled 10 GbE ports must be physically direct-connected. Summit X670 Series® – Data Sheet

Open the catalog to page 1
Summit-X670-DS - 2

40 GIGABIT ETHERNET UPLINKS AND HIGH-SPEED 160 GBPS STACKING The Summit X670V model can support an additional four QSFP+ ports of 40 GbE with the optional VIM4-40G4X module. With this option, you can maximize the number of interfaces for servers up to 48 ports while using the dedicated four-port 40 GbE module for uplink connectivity. The optional VIM4-40G4X provides 160 Gbps aggregated bandwidth to the backbone. Each Summit X670 switches also support Priority-based Flow Control (PFC, or IEEE 802.1Qbb), which allows network traffic to be controlled independently based on Class of Service....

Open the catalog to page 2
Summit-X670-DS - 3

Campus Network Core Layer BlackDiamond® X Access Layer Top of the Rack Server Rack Server Rack Server Rack Server Rack Server Rack Server Rack 5600_01 Figure 1: Top of Rack Switch for Servers in the Enterprise Data Center 40 GIGABIT ETHERNET QSFP+ Extreme Networks simplifies network operation by offering one The Summit X670V model provides a VIM4 slot for the optional common OS – ExtremeXOS – throughout the BlackDiamond VIM4-40G4X module. The VIM4-40G4X module supports four and Summit switchIng portfolio. From 10/100 Mbps switching QSFP+ optics, and supports up to four ports of 40 GbE. 40...

Open the catalog to page 3
Summit-X670-DS - 4

Modular Operating System for Non-Stop Operation SOFTWARE-ENHANCED AVAILABILITY Software-enhanced availability allows users to remain connected to the network even if part of the network infrastructure is down. PREEMPTIVE MULTITASKING AND PROTECTED MEMORY Summit X670 continuously checks for problems in the uplink Summit X670 series switches allow each of many applications— such as Open Shortest Path First (OSPF) and Spanning Tree Protocol (STP)—to run as separate OS processes that are connections using advanced Layer 3 protocols such as OSPF, VRRP and Extreme Standby Router Protocol (ESRP,...

Open the catalog to page 4
Summit-X670-DS - 5

Robust IP / MAC Security Framework MEDIA ACCESS CONTROL (MAC) LOCKDOWN IP/port bindings providing the traffic’s source from a specific address for immediate defense. IDENTITY MANAGEMENT MAC security allows the lockdown of a port to a given MAC address and limiting the number of MAC addresses on a port. This capability can be used to dedicate ports to specific hosts or devices such as VoIP phones or printers and avoid abuse of the port—a capability that can be especially useful in environments such as hotels. In addition, an aging timer can be configured for the MAC lockdown, protecting the...

Open the catalog to page 5
Summit-X670-DS - 6

stackable switches, Summit X670 series switches provide ease of management of Extreme Networks products, solutions and third- management for demanding converged applications. party devices in a converged network. Extreme Networks has developed tools that simplify and help in efficiently managing your network. Ridgeline network and SUPPORTED PROTOCOLS AND STANDARDS service management provides fault, configuration, accounting, A list of supported protocols and standards is available performance and security functions, allowing more effective on the Extreme Networks website at: Technical...

Open the catalog to page 6
Summit-X670-DS - 7

EMI/EMC STANDARDS NORTH AMERICA EMC FOR ITE FCC CFR 47 part 15 Class A (U.S.A.) ICES-003 Class A (Canada) EUROPEAN EMC STANDARDS EN 55022:2006 Class A EN 55024:A2-2003 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11 EN 61000-3-2,8-2006 (Harmonics) EN 61000-3-3 1995+A2:2005 (Flicker) ETSI EN 300 386 v1.3.3, 2005-04 (EMC Telecommunications) 2004/108/EC EMC Directive EMI/EMC STANDARDS (CONTINUED) INTERNATIONAL EMC CERTIFICATIONS CISPR 22: 2006 Ed 5.2, Class A (International Emissions) CISPR 24:A2:2003 Class A (International Immunity) EC/EN 61000-4-2:2001 Electrostatic Discharge, 8kV Contact, 15...

Open the catalog to page 7

All Extreme Networks catalogs and technical brochures

  1. WiNG AP 8432

    4 Pages

  2. SLX 9850

    10 Pages

  3. X440-G2

    13 Pages

  4. WiNG AP 7532

    7 Pages

  5. AP 7612

    5 Pages

  6. SLX 9640

    9 Pages

  7. X590 series

    9 Pages

  8. SLX 9030

    9 Pages

  9. VSP 8400

    9 Pages

  10. 220 Series

    10 Pages

  11. X870

    7 Pages

  12. S-Series

    19 Pages

  13. D-Series-DS

    7 Pages

  14. E4G-200-DS

    6 Pages

  15. A-Series-DS

    7 Pages

  16. X670V-48t-DS

    8 Pages

  17. X670-G2-DS

    11 Pages

  18. A-Series

    7 Pages

  19. 800-Series

    8 Pages

  20. 7100G-Series

    7 Pages

  21. AP3825

    12 Pages

  22. Summit X430

    6 Pages

  23. Summit X460-G2

    15 Pages

  24. Summit X670-G2

    11 Pages

  25. K-Series

    13 Pages

  26. Mobile IAM

    3 Pages

  27. Ridgeline

    11 Pages

  28. I-Series

    4 Pages

  29. G-Series

    7 Pages

  30. D-Series

    7 Pages

  31. 7100-Series

    5 Pages

  32. DSSumX670_1777

    10 Pages

  33. PAG_1002.

    9 Pages

  34. DSSummitX460

    12 Pages

  35. Summit 48si

    4 Pages

  36. XENPAK

    3 Pages

  37. ExtremeWare

    5 Pages

  38. EAS Series

    6 Pages

  39. Alpine

    5 Pages

Archived catalogs

  1. S-Series®

    18 Pages