DATA SHEET G-Series Policy-based 10 G Modular L2/L3/L4 Edge Switch BENEFITS BUSINESS ALIGNMENT • Versatile edge switch combines the size and cost-effectiveness of a stackable and the modularity of a chassis to support business-critical applications • High-availability design with redundant power assures reliable network operations • Granular QoS capabilities support converged multimedia networks OPERATIONAL EFFICIENCY • Modular architecture supports network growth and flexible connectivity, including 10GE • Centralized management and role-based policies reduce network operational expenses • Complete multi-layer switching with IPv4 and optional IPv6 routing for evolving network architectures • 3-slot modular architecture supports high-density Gigabit Ethernet and 10GE I/O modules • High-availability design with redundant power assures reliable network operations • PoE and IPv4 & IPv6 routing support a variety of networks and devices • Aligns network resource utilization with business goals and priorities • 384 Gbps capacity and 214 Mpps line-rate switching and routing Product Overview The Extreme Networks G3 is a Gigabit Ethernet switch with 3 expansion slots that support 24-port Gigabit Ethernet as well as 2-port and 4-port 10GE I/O modules. With its wire-rate switching and routing capabilities, including IPv6 routing, the G3 is well-suited for dynamic switching/routing environments that require high- • Integral security without performance degradation density Gigabit Ethernet ports and high-capacity 10GE uplinks. Along with a • Network security maintained concurrently with user mobility are combo ports, which can be accessed via either the 10/100/1000Base-T or 1 • Network resources securely allocated according to user operational roles switch capacity of 384 Gbps, the G3 provides 24 Ethernet ports (either fixed 10/100/1000Base-T or 1 Gbps SFPs). Two of the ports on the 10/100/1000 switches Gbps Small Form-Factor Pluggable (SFP) connectors. In order to provide a reliable, high-availability network, the G3 offers fieldreplaceable redundant power supplies and supports Link Aggregation Groups (LAGs), OSPF Equal Cost Multipath and Virtual Router Redundancy Protocol (VRRP). Both the standard and Power over Ethernet (PoE) G3 models support • Industry-leading customer satisfaction and first call resolution rates redundant, integral power supplies, which can be configured to operate in either a • Personalized services, including site surveys, network design, installation, and training Service (QoS) features enable strong support for converged multimedia networks, • Lifetime warranty load-sharing (redundant) or additive power configuration. In conjunction with its non-blocking architecture, the G3’s robust Quality of including Voice over IP (VoIP) and video, as well as all types of data-intensive applications. The G3’s highly customizable Layer 2/3/4 packet classification capabilities together with its intelligent queuing mechanisms ensure that missioncritical applications receive prioritized access to network resources. G-Series – Data Sheet

Making use of Extreme Networks’ policy capabilities, a network • Address table size: up to 32,000 addresses are supported administrator can define distinct roles or profiles that represent • Hardware queues: 8 hardware queues per port are supported specific operational groups within an organization. Each defined role is granted individualized access to specific network services and applications (e.g., manager, employee, guest) and these access privileges remain associated with users as they move across both wired and wireless network access points. Users are authenticated via IEEE 802.1X, MAC...

HIGH AVAILABILITY • Virtual Router Redundancy Protocol (VRRP): requires optional G3 Advanced Routing License. VRRP allows creation of highly available routed environments • IEEE 802.1s Multiple Spanning Tree Protocol: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol • IEEE 802.3ad Link Aggregation Control Protocol (LACP): Flexible Link Aggregation Groups (6 groups of 8, 12 groups of 4 or 24 groups of 2) which allow multiple Ethernet ports (8, 4 or 2) to...

Standards and Protocols Switching Services Protocols IEEE 802.1D – MAC Bridges IEEE 802.1s – Multiple Spanning Trees IEEE 802.1t – 802.1D Maintenance IEEE 802.1w – Rapid Spanning Tree Reconvergence IEEE 802.3 – Ethernet IEEE 802.3ab – GE over Twisted Pair IEEE 802.3ad – Selectable Link Aggregation Configuration (6 x 8, 12 x 4, 24 x 2) IEEE 802.3ae – 10 Gigabit Ethernet (fiber) IEEE 802.3af – PoE IEEE 802.3i – 10Base-T IEEE 802.3u – 100Base-T, 100Base-FX IEEE 802.3z – GE over Fiber Full/half duplex auto-sense support on all ports IGMP Snooping v1/v2/v3 Jumbo Frame support (9,216 bytes) Loop Protection...

24-port 10/100/1000 switch with 3 modular expansion slots (power supply not included) 24-port 10/100/1000 PoE switch with 3 modular expansion slots (power supply not included) 24-port SFP switch with 3 modular expansion slots (power supply not included) 24 fixed RJ-45 10/100/1000 ports with 2 SFP combo ports expandable to 96 (Type 10Base-T, Type 100Base-TX, Type 1000Base-T) 24 fixed RJ-45 10/100/1000 ports with PoE and 2 SFP combo ports expandable to 96 (Type 10Base-T, Type 100Base-TX, Type 1000Base-T) 24 fixed SFP 1000Base-X/ 100FX ports expandable to 96 (SFP: Small FormFactor Plug-in) transceivers...

Temperature Operating Temperature (C/F) High Speed CE / FCC Class A / VCCI / C-Tick /BSMI CE / FCC Class A / VCCI / C-Tick / BSMI CE / FCC Class A / VCCI / C-Tick /BSMI Humidity Operating Humidity Acoustics Agency & Standards Specifications Standard Safety (UL) Electromagnetic Compatibility Standard EMC Vibration Non-Operational Shock and Drop IOMs G3G-24TX – 24 10/100/1000 port IOM with 2 Combo SFP ports G3G-POE-B – Power over Ethernet daughter card Physical Specs Dimensions (HxWxD) Thermal Output (BTUs/Hr) Input Voltage Input Current Power Consumption (watts) CE / FCC Class A / VCCI / C-Tick...