Catalogs >
Extreme Networks >
ExtremeSwitching™ X440-G2

ExtremeSwitching™ X440-G2
1 / 13Pages

Catalog excerpts

Data Sheet Highlights Hardware Models • 12, 24, and 48-port GbE models • 4 x 1GbE available uplink ports upgradeable to 10GbE via software license (except for extended temperature models) • SFP, Copper PoE-Plus, non-PoE and 100Base-FX models • Extended 0°C to 60°C operating range models • Two SummitStack-V stacking ports (except for extended temperature models) enable up to 8 switches to be stacked together • All configurations non-blocking full duplex • 10GbE LRM support on 48-port switch models Features • Side-to-side, left-to-right airflow • Fixed power supplies, along with RPS • Full PoE-Plus 30W power on 48-port models • DC Power option • Energy Efficient Ethernet • 10MB/100MB half-duplex support • Role-based policy capabilities allow individualized access to specific applications or services • ExtremeCloud™ cloud-based management on select models • Extreme Management Center Support ExtremeSwitching™ X440-G2 Scalable Cost-Effective Edge Switch with ExtremeXOS Modular Operating System Product Overview The ExtremeSwitching X440-G2 series is a scalable cost-effective family of edge switches powered by Extreme Networks ExtremeXOS, a highly resilient OS providing continuous uptime, manageability and operational efficiency. The X440-G2 series switches provide high-performance routing and switching, flexible stacking, PoE-plus support and comprehensive security, while extending the benefits of ExtremeXOS to the campus edge. The X440-G2 Series easy-to-use, yet powerful, management services include role-based policies for controlled access to specific network applications. Select X440-G2 Series switches can also be cloud-managed via ExtremeCloud™, Extreme Networks innovative single-pane subscriptionbased management solution. Intelligent Switching The X440-G2 Series supports sophisticated and intelligent Layer 2 switching, as well as Layer 3 IPv4/IPv6 routing. They also support rolebased policy capabilities, Provider Bridges, bidirectional Access Control Lists, as well as granular (8 Kbps) ingress/egress bandwidth control. Altogether, these enable fine-grained control over traffic flows, as well as controlled access to specific network services and application. Flexible 10GBE Port Upgrades All X440-G2 base models come equipped with 4 upgradeable 1GbE ports, resident on either the faceplate or rear panel of each model. These 1GbE ports can be upgraded to 10GbE Ethernet via a simple software license. This gives administrators the option to increase switch uplink speeds without replacing the enti

Open the catalog to page 1

Notes: 10GbE upgrades are not supported on extended temperature models. The two rear-panel 1GbE copper combo ports on the 48 port switches become 10GBase-T ports when either 10GbE license is applied to the rear-panel SFP/SFP+ ports. High-Performance Stacking ExtremeXOS SummitStack-V capabilities allow up to eight X440-G2 switches to be stacked together via two of the native X440-G2 stacking ports. SummitStack-V allows use of standard 10Gb Ethernet cabling and optics technologies, providing longdistance stacking connectivity of up to 40 Km while eliminating the cable complexity of...

Open the catalog to page 2

Specifications Switch Model Maximum 10/100/1000 Base-T Ports Maximum Active 1Gb SFP Ports Maximum 10Gb SFP+ Ports Aggregated Switch Bandwidth* Frame Forwarding Rate* ¹ 2 10GBase-T combo ports *-with 10Gb licenses if available with license • Less than 4 microsecond latency (64-byte) • Layer 2/MAC Addresses: 16K • IPv4 LPM Entries: 480 • LRM support on rear-panel SFP/SFP+ ports on all 48-port switches • Policy Capabilities • 4092 user-created VLAN/VMANs • 9216 Byte Max Packet Size (Jumbo Frame) • 128 load sharing trunks, up to 8 members per trunk • 1,024 ingress bandwidth meters, 256 egress...

Open the catalog to page 3

Specifications (Cont.) Switch Hardware 12 x 10/100/1000BASE-T (RJ-45) 4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing 1 x Serial (console port RJ-45) with RTS/CTS modem control 1 x 10/100/1000BASE-T out-of-band management port Coaxial Barrel Connector RPS port 24 x 10/100/1000BASE-T (RJ-45) 4 x 1GBASE-X SFP (unpopulated) combo ports 4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing 1 x Serial (console port RJ-45) with RTS/CTS modem control 1 x 10/100/1000BASE-T out-of-band management port 2x7 RPS port 48 x...

Open the catalog to page 4

Specifications (Cont.) Switch Hardware 24 x 100Base-FX – LC connectors 4 x 1GBASE-X SFP (unpopulated front-panel ports) 1 x Serial (console port RJ-45) with RTS/CTS modem control 1 x 10/100/1000BASE-T out-of-band management port 2x7 RPS port 12 x 10/100/1000BASE-T with 8 x 100Base-FX – LC connectors 4 x 1GBASE-X SFP (unpopulated front-panel ports) 1 x Serial (console port RJ-45) with RTS/CTS modem control 1 x 10/100/1000BASE-T out-of-band management port 2x7 RPS port 24 x 10/100/1000BASE-T (RJ-45) 4 x 1GBASE-X SFP (unpopulated rear-panel ports) 1 x Serial (console port RJ-45) with RTS/CTS...

Open the catalog to page 5

Note: SummitStack-V stacking is enabled on two of the four to 1GbE, unless upgraded via software license. 10GbE licenses are X440-G2 uplink ports by default (no license required). All stacking available, in both two- and four-port versions, as well as a license to ports operate at 10Gb,but do not use standard Ethernet protocols. upgrade a dual 10GbE uplink switch to a four 10GbE uplink swiitch, X440-G2 uplink ports, when not used for stacking, run the standard that enable X440-G2 uplink ports to run the 10Gb Ethernet protocol. Non-stacking uplink ports are limited by default Ethernet...

Open the catalog to page 6

Switch Model Power Supply Input Socket Power Cord Input Plug/Input Socket Power Supply Cord Gauge Redundant Power Supply Input Socket Coaxial Barrel Connector PoE-Plus Power Budget Switch Model Internal Power Supply 200 W – Redundant Power Only 380 W – Redundant Power Only 1440 W – Additive Power 740 W – Redundant Power Environmental Specifications Packaging and Storing Specifications • Humidity: 10% to 95% relative humidity, non-condensing • EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational • EN/ETSI 300 753 (1997-10) - Acoustic Noise • ASTM D3580 Random Vibration Unpackaged 1.5 G...

Open the catalog to page 7