DATA SHEET E4G-200 Cell Site Router HIGHLIGHTS The E4G-200 enables service providers to provide Ethernet/ IP services cost-effectively at any cell site, including optional TDM pseudowires and deployments of 4G base stations. Thisflexibility gives service providers the ability to deploy revenue-generating services at 2G/3G cell sites and allows for 4G deployments and new Ethernet/ IP services. • Increased Gigabit Ethernet ports – twelve active GbE ports • Optional industry-standard pseudowires – supports up to 16 E1/T1 ports with up to 256 pseudowires • Extended temperature range – from -40°C to +65°C • Certified and optional synchronization – both IEEE 1588v2 and SyncE • Carrier-grade resiliency – through EAPS (Ethernet Automatic Protection Switching, RFC 3619) or ITU-T G.8032 Ethernet Ring Protection standard • Integrated Ethernet OAM – support for IEEE 802.3ah, IEEE 802.1ag, and ITU Y.1731 in hardware for extremely accurate delay, jitter, and frame loss measurements Overview For service providers, revenue growth is increasingly driven by 3G and eventually 4G mobile services that provide access to compelling smartphone, and tabletbased, and other mobile applications. The challenge in designing true 4G mobile backhaul is to build a foundation that protects existing investments in 2G and 3G services, provides a superior subscriber experience, prepares for future 4G service requirements, and minimizes costs. This challenge can be met by deploying a true 4G mobile backhaul network with three key ingredients: resiliency, synchronization and performance. Extreme Networks E4G-200 router is a carrier-grade Ethernet platform that provides a seamless migration path from TDM circuits to Ethernet services for mobile operators and creates a fundamental Ethernet infrastructure capable of scaling to the needs of 2G, 3G and 4G mobile networks. Product Description The Extreme Networks E4G-200 Cell Site Router delivers Ethernet, IP/MPLS and pseudowire capabilities in a compact 1RU form factor. The E4G-200 provides mobile operators the ability to manage and aggregate TDM and Ethernet services and their associated protocols onto an economical and efficient Ethernet mobile backhaul infrastructure. The Extreme Networks E4G-200 Cell Site Router (CSR) is where 4G backhaul begins and where the T1/E1 pseudowire circuit for 2G/3G is also initiated. Installation is in or very near to the base station tower. 2G and 3G base stations use T1/E1 for backhaul connectivity and 4G base stations connect directly to the cell site router via Ethernet. The E4G-200 provides the necessary interfaces for • Line rate performance environment, in a design that is very compact (less than 10 inches/24 cm deep), • Compact size – 1 RU and only 10 inches/25.4cm in depth • All front access - every connection (data, power, & management) is from the front of the unit 2G, 3G, and 4G base stations while still meeting the demands of its installation and features an extended temperature range. The Extreme Networks E4G-200 router is designed for services running over an Ethernet and IP/MPLS infrastructure. The E4G-200 is designed to backhaul 2G, 3G and 4G mobile traffic, using a single backhaul network instead of a multiple backhaul networks which translates into an economical deployment model. Service providers, energy utilities, transportation and government agencies can deploy

Extreme Networks E4G-200 router for mobile backhaul with the transformation of TDM cell sites to Ethernet/IP/MPLS cell sites. knowledge that their deployments will have advanced services. With an extended temperature range of -40°C to +65°C, service • With advanced routing and switching features such as MPLS, providers can deploy the E4G-200 router at sites without climate IPv6, Ethernet OAM, and others, the E4G-200 is future proof control, enabling more sites to convert to packet-based backhaul, to protect the service provider’s investment reducing CapEx and OpEx, and allowing Ethernet/IP services...

Technical Specifications SYNCHRONIZATION • Internal Stratum-3 Clock (Telcordia GR-1244-CORE) • Common Clock Distribution across All Ports • External Reference Timing Input (BITS) • Synchronous Ethernet (ITU-T G.8262) • IEEE 1588v2 Precision Time Protocol Layer 2 VPNs • Pseudowire Setup and Maintenance using the Label Distribution Protocol (LDP) • Encapsulation Methods for Transport of Ethernet over MPLS Networks • Virtual Private LAN Services (VPLS) using Label Distribution Protocol (LDP) Signaling • Pseudowire Virtual Circuit Connectivity Verification (VCCV) • Adaptive Clock Recovery (ACR) for...

• Layer 3 Interfaces: 4K • IP Multicast Groups: 4K E4G-200-12x-DC Router • Weight 7.14 lb (5.46 kg) • Height 1.75 inches (4.4 cm) • Single Core CPU, 800 Mhz clock • Ingress bandwidth meters: 2,048 • Ingress metering granularity: 8 Kbps • Ingress bandwidth policing/rate limiting per flow/ACL • Egress QoS queues/port: 8 • Egress bandwidth rate shaping per egress queue and per port • Egress rate granularity: 8 Kbps LED Indicators • Per port status LED including power status • System Status LEDs: management, fan and power feeds EXTERNAL PORTS E4G-200-DC Router • 8 x 10/100/1000BASE-T (RJ-45) • 4...

Power Specification POWER SPECIFICATION Nominal Input Ratings Input Current at Full Load Input Power at Full Load Heat Dissipation Maximum Inrush Current Input Current at Full Load Input Power at Full Load Heat Dissipation Maximum Inrush Current Input Current at Full Load Input Power at Full Load Heat Dissipation Maximum Inrush Current E4G-200 BASE UNIT W/ E4G-F16 T1E1 MODULE E4G-200 BASE UNIT W/ E4G-CLK MODULE E4G-200 BASE UNIT W/ E4G-F16 T1E1 MODULE AND E4G-CLK MODULE Input Current at Full Load Input Power at Full Load Heat Dissipation Maximum Inrush Current Power Connections • 3-pin terminal...