Catalogs >
Extreme Networks >
DSSummitX770_1945_01

DSSummitX770_1945_01
9Pages

Catalog excerpts

Extreme Networks Data Sheet The Summit X770 series switches are Summit X770 provides high density for 40 Gigabit Ethernet and 10 Gigabit Ethernet high-density, purpose-built top-of-rack switching in a small 1RU form factor. switches designed to support emerging 10 Gigabit Ethernet and 40 Gigabit Ethernet- Port Density enabled servers in enterprise and cloud data centers. Summit X770 helps optimize new Single Summit X770 Stack of Summit X770 server deployments with its 40 GbE ports – each can be used natively as uplinks to With its versatile design, the Summit X770 series provides high density Layer 2/3 switching BlackDiamond X8 chassis or other Summit with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast routing to X770 acting as spines – and each 40GbE enable enterprise aggregation and core backbone deployment in AC-powered and port can connect directly to servers using DC-powered environments. 40GbE speeds or by breaking down into 10GbE connections acting as the leaf. Summit X770 series simplifies network operation with the ExtremeXOS modular operating system (OS), which is used among all Extreme Networks Summit and BlackDiamond The Summit X770 can be used as a spine or Ethernet switches. The high availability ExtremeXOS operating system provides simplicity a leaf in fat tree topologies for servers with and ease of operation through the use of one OS everywhere in the network. 10GbE and 40GbE ports. Size & Weight Height = 1.73” 40 Gigabit Ethernet & 10 Gigabit Ethernet Ports The Summit X770 model provides 32 x 40 GbE QSFP+ ports which can accept QSFP+ passive and active cables, as well as QSFP+ transceivers. 40 GbE ports can be configured as a 40 GbE port or as four 10 GbE ports. The 10 GbE port mode can be supported by a 40GBASE-SR4 QSFP+ transceiver and fan-out optical cables, and is compatible with the Ports: 32 x 40GBase-X QSFP+ 1 RJ-45 Serial Port 1 RJ45 Ethernet Management Port 1 USB Port (rear) 2 Mini BNC Ports (rear) 1588 output 10GBASE-SR optical interface for distances up to 100 meters. 24 of the 32 QSFP+ ports can be broken into 4 ports of 10GbE. The remaining 8 ports of QSFP+ can also be converted into a single port of 10GbE giving a maximum of 104 ports of 10GbE connections in a 1 RU device. The Summit X770 is capable of Layer 2 and Layer 3 forwarding at up to 1904 million packets per second forwarding rate. High-Speed Stacking Summit X770 supports three different types of stacking: SummitStack-320, SummitStack-160, and SummitStack-V. SummitStack-320 provides high speed stacking

Open the catalog to page 1

Extreme Networks Data Sheet: Summit X770 Series running at 320 Gbps through the SummitStack-320 technology. XNV (ExtremeXOS Network Virtualization), which is natively supported in SummitStack-320 can be enabled on four 40 Gigabit Ethernet QSFP+ ports the ExtremeXOS operating system and is a licensable feature pack for as stacking interfaces. SummitStack-160 provides high-speed stacking Ridgeline, a network and service management application, sold separately. running at 160 Gbps through the SummitStack-160 technology. XNV provides insight, control and automation for virtualized data centers....

Open the catalog to page 2

Extreme Networks Data Sheet: Summit X770 Series Figure 1: Top of Rack Switch for Servers in the Enterprise Data Center Extreme Networks simplifies network operation by offering one common Summit X770 series switches supports a rich suite of protocols to help with OS – ExtremeXOS – throughout the BlackDiamond and Summit portfolio. Operations, Administration and Maintenance. From 10/100 Mbps switching products such as Summit X430 and Summit X440 to the multi-10 gigabit core backbone BlackDiamond modular chassis switches, all switches can run the same version of the OS, which helps...

Open the catalog to page 3

Extreme Networks Data Sheet: Summit X770 Series Figure 2: Summit X770 High Speed Uplink Option High Availability Network Protocols Hardware Redundancy Ethernet Automatic Protection Switching (EAPS) Summit X770 series switches support a dual redundant AC/DC power EAPS allows the IP network to provide the level of resiliency and uptime that users expect from their traditional voice network. EAPS is more adaptable than Spanning Tree or Rapid Spanning Tree protocols and can achieve sub-second (less than 50 milliseconds) recovery that delivers consistent failover regardless of the number of...

Open the catalog to page 4

Extreme Networks Data Sheet: Summit X770 Series 1588 Precision Time Protocol (PTP) Output Ports for 1PPS and 1090MHZ Signals Redundant AC-DC PSU Summit X770 Threat Detection and Response CLEAR-Flow Security Rules Engine CLEAR-Flow Security Rules Engine provides first-order threat detection and mitigation, and mirrors traffic to security appliances for further analysis of suspicious traffic in the network. Secure and Comprehensive Network Management As the network becomes a foundation of the enterprise application, network management becomes an important piece of the solution. Summit X770...

Open the catalog to page 5

Extreme Networks Data Sheet: Summit X770 Series Technical Specifications *** Summit X770 Series Physical Specifications (continued) Summit X670 Fan Module* Height: 1.65 Inches/4.2 cm General Specifications Quality of Service and Policies 2560 Gbps switch bandwidth, 1904 Mpps forwarding rate (Summit X770-32q) 9216 Byte maximum packet size (Jumbo Frame) Store-and-Forward and Cut-Through switching support Less than 600 nano second latency (64-byte packet) 128 load sharing trunks, up to 8 members per trunk 4,094 VLANs (Port, Protocol, IEEE 802.1Q) 4,096 ingress and 1,024 egress ACL rules per...

Open the catalog to page 6

Extreme Networks Data Sheet: Summit X770 Series EMI/EMC Standards (continued) International EMC Certifications CISPR 22: 2010, Class A (International Emissions) CISPR 24:2010 Class A (International Immunity) IEC/EN 61000-4-2:2009 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A IEC/EN 61000-4-3:2006+A1: 2008+A2:2010, Radiated Immunity, 802500MHz, 5-20V/m, Criteria A IEC/EN 61000-4-4:2012 Transient Burst, 2 kV, Criteria A IEC/EN 61000-4-5:2006 Surge, 2 kV L-L, 4 kV L-G, Level 3, Criteria A IEC/EN 61000-4-6:2009 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A IEC/EN...

Open the catalog to page 7