Catalogs >
Extreme Networks >
100GE CFP2 Optics

100GE CFP2 Optics
3Pages

Catalog excerpts

DATA SHEET 100GE CFP2 Optics The IEEE 802.3ba committee ratified the 100 Gigabit Ethernet standard and along with the general specification, defined a number of fiber optic interfaces. These standard interfaces attempted to satisfy a number of different objectives including support for MMF and SMF compatibility. 100G LR4 CFP2 OPTICAL MODULE 100GBASE-LR4 transceivers are most commonly deployed between datacenter or IXP over single mode fiber 100G SR10 CFP2 OPTICAL MODULE 40GBASE-SR10 transceivers are used in a data center to interconnect two Ethernet switches requiring 24 lane ribbon OM3 or OM4 cables. Target Applications The CFP2 pluggable interface is an industry standard – Multisource Agreement (MSA) for pluggable 100 Gigabit Ethernet Optics. Products 100G LR4 CFP2 OPTICAL MODULE • 100GBASE-LR4 transceiver support with a link length up to 10 kilometers over 1310 nm single mode fiber, LC Connector 100G SR10 CFP2 OPTICAL MODULE • 100GBASE-SR transceiver support with a link length up to 100m over 850 nm multimode fiber, MPO Connector. 100GE CFP2 Optics – Data Sheet

Open the catalog to page 1

Technical Specifications 100GE CFP2 LR4 Fiber Type Connector Type Launch Power min (avg) Receiver Power Range Center Wavelength Range Distance Range Mean Time Between Failure (MTBF) Hours Note: All Extreme Networks qualified CFP2 plugables meet or exceed the IEEE 802.3ae 100 Gigabit Ethernet specification. The table above shows some CFP2 parameters that may be useful for 100 Gigabit Ethernet deployments. Physical Specifications • Dimensions (HxWxD): 7.007 x 6.61 x 3.14 in 17.8 x 16.8 x 8cm) • Weight: 11.11 lb (315g) unpackaged, 01.516 lb (43 g) packaged • Shipping box dimensions (HxWxD):...

Open the catalog to page 2

• IEC/EN 61000-4-11:2004 Power Dips & Interruptions, • CISPR 22:2008, Class A (International Emissions) >30%, 25 periods, Criteria A Note: All CFP2 modules meet the above standards when installed in • CISPR 24:2010, Class A (International Immunity) Extreme Networks equipment. • IEC/EN 61000-4-2:2008 Electrostatic Discharge, 8kV Contact, 15kV Air, Criteria B • IEC/EN 61000-4-3:2010 Radiated Immunity 10V/m, 30MHz to 2GHz, Criteria A • IEC/EN 61000-4-4:2012 Transient Burst, 1kV, Criteria A • IEC/EN 61000-4-5 2005, Surge, 1kV L-L, 2kV L-G, Level 4, Criteria B • IEC/EN 61000-4-6:2008 Conducted...

Open the catalog to page 3