Extreme Networks Data Sheet Technical Specifications 1000BASE SFP Optics 1000BASE-BX 1000BASE-LX 1000BASE-SX Highlights Overview Extreme Networks® pluggable optics provide physical layer connectivity for optical-port modular switch IO blades and optical-port stackable switches. Extreme Networks optics are thoroughly tested and are subject to an extensive qualification process before being considered certified to work in Extreme Networks IO modules and switches. Only proven, qualified vendors are chosen to assist in providing an end-to-end optical solution. • Provides a range of form factor options for enterprise and service provider needs. • Helps network managers meet their varied and evolving network demands. • Hot-swappable, reliable, and cost-effective optics. There are four form factors available: XENPAK, XFP, SFP, and GBIC. Within these form factors there are a variety of choices depending on the customer application and distance capability required. Each optical interface operates and is managed like a fixed port but gives the customer flexibility to hot-swap or interchange to different optical module types (i.e., SR, LR, ZR). Key Features 1000BASE-SX • 1000BASE-SX SFP supports link length of up to 550m (depending on fiber type) on multimode fiber at 1Gbps. This optic works at 850nm wavelength and uses an LC connector. 1000BASE-LX • 1000BASE-LX SFP supports link length of up to 10km on single mode fiber at 1Gbps. This optic works at 1310nm wavelength and uses an LC connector. 1000BASE-ZX • 1000BASE-ZX SFP supports link length of up to 80km on single mode fiber at 1Gbps. This optic works at 1550nm wavelength and uses an LC connector. 1000BASE BX-D* • 1000BASE BX-D SFP supports link length of up to 10km point to point on single mode fiber (1490nm TX/1310nm RX wavelength) at 1Gbps bidirectional. This optic uses an LC connector. *1000BASE-BX optics have two models and must be used in a pair. 1000BX is a technology that allows 1000BASE Ethernet connectivity via single fiber cable. Make Your Network Mobile

Extreme Networks Data Sheet: 1000BASE SFP Optics Technical Specifications 1000BASE LX100 1000BASE BX-U* • LX100 SFP supports link length of up to 100km on single mode fiber at 1Gbps. This optic works at 1550nm wavelength and uses an LC connector. • 1000BASE BX-U SFP supports link length of up to 10km point to point on single mode fiber (1310nm TX/1490nm RX wavelength) at 1Gbps bidirectional. This optic uses an LC connector. 100FX 100FX/1000LX** • LX100 SFP supports link length of up to 2km on multimode fiber at 100 Mbps (x10). This optic works at 1310nm wavelength and uses an LC connector. For...

Extreme Networks Data Sheet: 1000BASE SFP Optics EMC Compliance Technical Specifications • IEC/EN 61000-4-2 Electrostatic Discharge, 8kV Contact, 15kV Air, Criteria A • IEC/EN 61000-4-3 Radiated Immunity 10V/m, Criteria A • IEC/EN 61000-4-4 Transient Burst, 1kV, Criteria A • IEC/EN 61000-4-5 Surge, 1kV L-L, 2kV L-G, Level 4, Criteria A • IEC/EN 61000-4-6 Conducted Immunity, 0.15-80MHz, 10V/m unmod. RMS, Criteria A • IEC/EN 61000-4-11 Power Dips & Interruptions, >30%, 25 periods, Criteria A North America EMC for ITE • FCC CFR 47 part 15 Class A (USA) • ICES-003 Class A (Canada) European EMC Standards...