Extreme Networks Data Sheet Technical Specifications 10/100/1000BASE-T SFP Highlights Overview Extreme Networks® pluggable optics provide physical layer connectivity for optical-port modular switch IO blades and optical-port stackable switches. Extreme Networks optics are thoroughly tested and are subject to an extensive qualification process before being considered certified to work in Extreme Networks IO modules and switches. Only proven, qualified vendors are chosen to assist in providing an end-to-end optical solution. • Provides a range of form factor options for enterprise and service provider needs. • Helps network managers meet their varied and evolving network demands. • Hot-swappable, reliable, and cost-effective optics. There are four form factors available: XENPAK, XFP, SFP, and GBIC. Within these form factors there are a variety of choices depending on the customer application and distance capability required. Each optical interface operates and is managed like a fixed port but gives the customer flexibility to hot-swap or interchange to different optical module types (i.e., SR, LR, ZR). Key Features 10/100/1000BASE-T SFP • Up to 1.25Gb/s bidirectional data links • Hot-pluggable SFP footprint • Extended case temperature range (0° C to +85° C ) • Fully metallic enclosure for low EMI • Low power dissipation (1.05 W typical) • Compact RJ-45 connector assembly • Access to physical layer IC via 2-wire serial bus • 10/100/1000BASE-T operation in host systems with SGMII interface Make Your Network Mobile
Open the catalog to page 1Extreme Networks Data Sheet: 10/100/1000BASE-T SFP Technical Specifications 10/100/1000BASE-T Optic Category 5 Fiber Type RJ-45 Connector Type Tx Output Impedance (Transmission Line SFP) 100 Ohm Rx Input Impedance (Transmission Line SFP) 100 Ohm Tx Input Impedance (host-SFP) 50 Ohm (single-ended) Rx Output Impedance (host-SFP) 50 Ohm (single-ended) 3.3V Voltage (Typical) 3.13 to 3.47V Input Voltage Range 4V Maximum Voltage Distance Range (Distance/Speed) 100m/1Gps;150m/100Mbps;250m/10Mbps 1.25Gb/s bidirectional Data Rate Mean Time Between Failure (MTBF) 5,650,000 hours Technical Specifications...
Open the catalog to page 2Extreme Networks Data Sheet: 10/100/1000BASE-T SFP Technical Specifications Ordering Information Part Number Description 10/100/1000BASE-T 10065 10/100/1000 copper SFP, SGMII interface, 100M over Category 5 cable Make Your Network Mobile Corporate and North America Extreme Networks, Inc. 3585 Monroe Street Santa Clara, CA 95051 USA Phone +1 408 579 2800 Europe, Middle East, Africa and South America Phone +31 30 800 5100 Asia Pacific Phone +65 6836 5437 Japan Phone +81 3 5842 4011 extremenetworks.com © 2011 Extreme Networks, Inc. All rights reserved. Extreme Networks, the Extreme Networks Logo,...
Open the catalog to page 310 Pages
18 Pages
8 Pages
7 Pages
10 Pages
9 Pages
6 Pages
5 Pages
13 Pages
4 Pages
5 Pages
7 Pages
7 Pages
11 Pages
10 Pages
11 Pages
7 Pages
8 Pages
7 Pages
3 Pages
7 Pages
10 Pages
6 Pages
9 Pages
12 Pages
10 Pages
6 Pages
5 Pages
15 Pages
4 Pages
11 Pages
5 Pages
5 Pages
24 Pages
5 Pages
13 Pages
3 Pages
7 Pages
11 Pages
8 Pages
4 Pages
7 Pages
5 Pages
3 Pages
3 Pages
9 Pages
6 Pages
4 Pages
5 Pages
5 Pages
10 Pages
9 Pages
12 Pages
9 Pages
6 Pages
7 Pages
7 Pages
5 Pages
5 Pages
3 Pages
5 Pages
9 Pages
4 Pages
10 Pages
7 Pages
3 Pages
6 Pages
10 Pages
5 Pages
3 Pages
5 Pages
6 Pages
7 Pages
10 Pages
5 Pages
3 Pages
6 Pages
5 Pages
8 Pages
5 Pages
9 Pages
18 Pages
17 Pages
11 Pages
9 Pages
18 Pages
19 Pages
10 Pages
19 Pages
12 Pages
9 Pages
20 Pages
23 Pages
8 Pages
6 Pages
7 Pages
10 Pages
10 Pages
18 Pages