A LASTING COMMITMENT
45Pages

{{requestButtons}}

Catalog excerpts

A LASTING COMMITMENT - 1

Extec Corp., a manufacturer of supplies and sample preparation equipment, is proud to provide you with our catalog of EXTEC® Premium Supplies and Equipment. Extec’s focus is on the critical supplies side for sample preparation with a full range of equipment to accomodate your every need. Utilizing the most advanced and thoroughly tested materials, Extec prides itself on offering the professional technician high quality, affordable, supplies and equipment needed for consistent, reliable precision testing. Extec strives to be the premier choice to laboratories throughout the world for accurate sample preparation. We make things easy for you with our extensive Web site, www.extec.com., and a dedicated helpline to answer technical questions. Extec and www.extec.com signify our commitment to provide the highest quality products and service available. We welcome your comments and suggestions about the EXTEC® product line. EXTEC CORP.

Open the catalog to page 1
A LASTING COMMITMENT - 2

EXTEC sample preparation Cut-Off Wheels are available in 6" (152 mm), 7" (178 mm), 9" (229 mm), 10" (250 mm), 12" (300 mm), 14" (350 mm), 16” (400 mm), 17” (432 mm) and 18” (455 mm) diameters and are engineered to provide the best possible burr free materials sectioning. Aluminum Oxide (Al2O3) abrasives are suggested for sectioning hard, medium, and soft metals, ferrous alloys, and tool steels. Silicon Carbide (SiC) is preferred for the following: medium and soft non-ferrous metals; hard non-metallics; composites; titanium alloys and ceramics. For best results use EXTEC Soluble Fluid, a...

Open the catalog to page 2
A LASTING COMMITMENT - 6

EXTEC PRECISION SERIES Sample Preparation Cut-Off Wheels Rubber Bonded are engineered for high speed precision sectioning. Available in 5” (127 mm), 6” (152 mm), 7” (178 mm) and 8” (203 mm) diameters in Aluminum Oxide for hard and medium-soft ferrous materials; Silicon Carbide for non-ferrous materials. CATALOG NUMBER 5” (127 mm) Diameter Abrasive Cut-Off Wheels EXTEC PRECISION Aluminum Oxide (Al2O3) Abrasive Cut-Off Wheels 5” Diameter x 0.19” Thickness x 1/2” Arbor (127 mm x @ 0.5 mm x 12.7 mm) 10502 Hard Ferrous Pkg/10 EXTEC PRECISION Silicon Carbide (SiC) Abrasive Cut-Off Wheels 5”...

Open the catalog to page 6
A LASTING COMMITMENT - 7

EXTEC Diamond Wafering Blades are available in high or low concentration in 3" (76 mm), 4" (102 mm), 5" (127 mm), 6" (152 mm), 7" (178 mm) and 8” (203 mm) diameters. High concentration is designed for routine use with most metals and ceramics. Low concentration is recommended for brittle materials such as ceramics, glass, carbides and other heat resistant materials. EXTEC EP Wafering Blades are specifically manufactured for soft and gummy materials. EXTEC I CBN (Cubic Boron Nitride) Wafering Blades are preferred for Iron and Cobalt Base Alloys, Nickel Base Super Alloys and Lead Base Alloys....

Open the catalog to page 7
A LASTING COMMITMENT - 9

EXTEC Coated Abrasives are specifically designed for wet or dry (W/D) material sample preparation and feature a durable, heavy weight or poly backing. Available in belt, disc, strip, roll and sheet form; Pressure Sensitive Adhesive (PSA) backed in disc or strip form. EXTEC Silicon Carbide (SiC) Abrasives are ideal for rough and fine grinding and polishing. EXTEC Aluminum Oxide (Al2O3) Abrasives are ideal for rough and fine grinding. EXTEC Zirconia Aluminum Abrasives are heavy duty and aggressive.

Open the catalog to page 9
A LASTING COMMITMENT - 12

C O R P. I CONSUMER GRADE COATED ABRASIVES EXTEC I Silicon Carbide (SiC) Consumer Grade Coated Abrasives available for wet or dry (W/D) applications with plain or Pressure Sensitive Adhesive (PSA) backing. EXTEC I Double-Sided Adhesive Pads to attach nonadhesive coated abrasive discs and polishing cloths. The adhesive is suitable for use with most slurry vehicles including oil, alcohol, and water. **Grit sizes are according to U.S. standards. P numbers are the corresponding European standards.

Open the catalog to page 12
A LASTING COMMITMENT - 14

EXTEC Dia-lap CONTINUOUS Diamond Lapping Dia-lap CONTINUOUS Diamond Lapping Film Film Discs are recommended for carbides, ceramics, Discs are available for wet or dry (W/D) appli- fiber optics, wafers, microelectronic devices, in cations with Pressure Sensitive Adhesive (PSA) or addition to petrographic and high hardness metals Plain Back from 0.1 micron to 45 micron. Special where critical surface flatness is required. size orders are also available. Premium graded continuous diamond particles are resin bonded to highly uniform polyester film resulting in consistent...

Open the catalog to page 14
A LASTING COMMITMENT - 15

This two-part Magnetic System conveniently reduces the cycle time to process microsctructure materials specimens. The two part magnetic based system consists of a MAGNETIC PSA (pressure sensitive adhesive) backed DISC, the PSA is directly attachable to existing platens. The MAGNETIC DISC receives a (second) METALLIC DISC, the versatile, non-corrosive METALLIC DISC accepts a complete variety of PSA abrasive discs, polishing cloths and pads, and all available diamond PSA products used during the plan grinding, fine grinding and polishing process.

Open the catalog to page 15
A LASTING COMMITMENT - 16

EXTEC Diamond Grinding Discs are available in standard sizes in both metal or resin bonded varieties with Pressure Sensitive Adhesive (PSA), plain back or overhanging cloth. They are recommended for coarse and fine grinding of high hardness materials. Metal flex feature a flexible, color-coded, open patterned metal bonded disc for aggressive cutting and reduced loading. Resin flex feature a flexible, color-coded, open patterned resin bonded disc for aggressive cutting. Metal bonded discs consist of a high quality diamond abrasive grit bonded to a wheel by an electroplating process. Resin...

Open the catalog to page 16
A LASTING COMMITMENT - 17

DIAMOND DISCS CATALOG NUMBER CATALOG NUMBER EXTEC Diamond Disc Metal Bonded 2 7/8" (73 mm) 20970 45 µm Each 20972 30 µm Each 20971 15 µm Each 20975 6 µm Each EXTEC Diamond Disc Metal Bonded 8" (203 mm) PSA 16302 165 µm Each 16306 70 µm Each 16312 45 µm Each 16316 30 µm Each 16322 15 µm Each 16321 9 µm Each 16319 6 µm Each EXTEC Diamond Disc Metal Bonded 12" (305 mm) PSA 16330 165 µm Each 16331 70 µm Each 16332 45 µm Each 16333 30 µm Each 16334 15 µm Each 16335 9 µm Each 16336 6 µm Each EXTEC Diamond Disc Metal Bonded 8" (203 mm) Overhanging Cloth Back EXTEC Diamond Disc Resin Bonded 8" (203...

Open the catalog to page 17