Instrumentation valves
12Pages

CEExpertEngineering Product Catalog

NVEE Type needle valves with hard seat are designed for use on applications requiring complete isolation or throttling of the media. The conical metal tip press fitted ensures perfect alignment for positive bubble tight shut-off. Available with end connections in sizes from 1/8" to 1” and a wide choice in connections of female screwed, male screwed, male to female screwed or socket weld. Optional : NVEX 10 - I ligh pressure valves for 10,000 psi pressure NVEE 20 - High pressure valves for 20,000 psi pressure Technical specifications Design Pressure Max temp. Material Stem Gland Packing Stem...

BBVEE type gauge valve is a block and bleed needle pattern gauge valve with specially designed integral bleed of M8. Ideal for use on applications requiring bleeding or venting of media. Self centering needle non-rotating, on the valve seat. The conical metal tip press fitted ensures perfect alignment for positive bubble tight shut-off. Standard end connections are male inlet and female outlet or female inlet and female outlet from 1/4" to 3/4". Optional: BBVEE 10 - High pressure valves for 10,000 psi pressure BBVEE 20 - High pressure valves for 20.000 psi pressure Technical specifications...

TWO WAY MANIFOLDS With threaded horizontal port inlet, outlet and vent/test connection on the left hand side. The venting bonnet is positioned on the top and the isolating bonnet on the front. With threaded vertical port inlet and outlet. The vent/test connection is positioned on the front side. The drain bonnet is positioned on the right hand side and the isolating bonnet on the left hand side. INSTRUMENT A Front View EXPERT ENGINEERING

TWO WAY MANIFOLDS With threaded vertical port inlet and female outlet. The vent/test connection is positioned on the front side. The venting bonnet is positioned on the right hand side and the isolating bonnet on left hand side.

3VEE9 With two threaded vertical port inlets and outlets, both test connections are positioned on the left and right hand side. The two isolating bonnets are positioned on the left and right hand side and the equalizing bonnet is positioned on the front and two drain plug provided on both side at instrument side. THREE WAY MANIFOLDS (PIPE TO PIPE) 3VEE8 With threaded vertical port inlets and outlets. The isolating bonnets are positioned on the left and right hand side and the equalizing bonnet is positioned on the front. This manifold is specially designed as miniature valve to be remote...

THREE WAY MANIFOLDS (PIPE TO FLANGE) THREE WAY MANIFOLDS (FLANGE TO FLANGE) 3VEE6 Standard connection

FIVE WAY MANIFOLDS (PIPE TO PIPE) With threaded vertical port inlets and outlets. The vent/test ports are positioned on the bottom and top of the body. The isolating bonnets are positioned on the left and right hand side and the venting and equalizing bonnets are positioned on the front side. Specially designed for remote mounting to field meters, differential transmitters and chart recorders on gas service allowing fail safe configuration preventing pressure loss from the high to low pressure impulse lines. ^ Series for differential pressure gauges with 2 inlets NPT female at bottom and...

FIVE WAY MANIFOLDS (PIPE TO FLANGE) Five Valve Manifold Special Series to accommodate any half DIN 19213 interface complaint pressure transmitter. 2 inlets NPTfemale at front and 2 outlets Flange at back side DIN 19213. Vent/test connection at front, equalizing bonnets at top side, isolating bonnets at left and right side-venting bonnet at top. FIVE WAY MANIFOLDS (FLANGE TO FLANGE) With Flange horizontal port inlets and Flange port outlets. The vent/test ports are positioned on the bottom side. The isolating and venting bonnets are positioned on the left and right hand side and the...

INSTRUMENTATION BALL VALVE Instrumentation Ball Valve one piece ball stem ensures alignment of stem and orifice it reduce potential leak points does not require system pressure to seal is easily cleaned and purged available in square and round Body JOINT SEAL GLAND SEALS Carbon Steel SS 316 (std) SS 304 SS 316L Monel 400 Monel 500 Hastelloy C expert engineering'

INSTRUMENTATION FITTINGS HYDRAULIC FITTINGS

Cn EXPERT ENGINEERING^ Manufacturer eZ Exporter Instrumentations Valves, Fittings & Accessories :expertenggl Office: Suite No.62, Evershine Mall, Chincholi Bunder, Mindspace, Malad West, Mumbai-400064. Tel: +9122 49240341 D/3, Balwa Nagar, Madina Manzil Compund, S.V.Road, Goregaon (West), Mumbai-400062 Mob:+919820568025 / 9930568025 / 9820568022 | Email: info@expertengg.com | Website: www.expertengg.com m SIO @ iGQl 3