*mydirectindustry

frame holder

Product catalog summary

Air Treatment Solutions - Frame Holder for FE System Electrostatic Filters

Product Overview

This document describes frame holders specifically designed for FE System electrostatic filters. The frames come in standardized dimensions: 610 x 610 mm (24” x 24”), 610 x 305 mm (24” x 12”), and 305 x 610 mm (12” x 24”).

Frame Construction and Features

Made from galvanized sheet metal, bent and joined with rivets for durability.
Equipped with gaskets to ensure airtightness.
Includes special screw-type filter stops for secure filter placement.
Stronger than standard light sheet metal frames, capable of supporting the weight of electronic filters without deformation.

Compatibility and Usage

Designed to accommodate various combinations of horizontal or vertical electrostatic filters.
Can house FE System filters along with corrugated filters of 48 mm or 95 mm thickness.
Modules are connected using low-thickness nuts and bolts for secure assembly.

Model Codes and Dimensions

Model Code	Description	Dimensions
XTFE610	Frame support for FE600 filter + corrugated filter (48/95 mm)	610 x 610 mm (24” x 24”)
XTFE305	Frame support for FE300 filter + corrugated filter (48/95 mm)	305 x 610 mm (12” x 24”)
XTFE305R	Frame support for FE300RV filter + corrugated filter (48/95 mm)	610 x 305 mm (24” x 12”)

Manufacturer Information

Expansion Electronic SRL
Via delle Industrie, 18 · 36050 Cartigliano (VI) · ITALY
Phone: +39 0424 592400 / +39 0424 827058 / +39 0424 827059
Fax: +39 0424 827061
Website: www.expansion-electronic.com
Email: [email protected]

Catalog excerpts

frame holder Description Specifically designed for FE System electrostatic filters, in standardized dimensions610 x 610 mm (24 ’’ x 24 ’’), 610 x 305 mm (24 ’’ x 12 ’’) and 305 x 610 mm (12 ’’ x 24 ’’). The frame is made of galvanized sheet metal bent, joined with rivets and equipped with gaskets for air tightness and special screw-type filter stops. Compared to standard frames made of light sheet metal, this type of frame is capable of bear the weight of electronic filters without being deformed. It can be used to make various combinations of horizontal or vertical electrostatic filters. The frame allows, in addition to the housing of the FE System filter, also the housing of a48 mm or 95 mm thick corrugated filter. The coupling between the various modules comes carried out by means of nuts and bo

Open the catalog to page 1

FRAME SUPPORT FILTER FE600 + PF ONDULATED 48 / 95mm FRAME SUPPORT FILTER FE300 + PF ONDULATED 48 / 95mm FRAME SUPPORT FILTER FE300RV + PF ONDULATED 48 / 95mm

Open the catalog to page 2