Hazardous Area Electrical Process Heaters & Control Solutions FP/BFP Flameproof Removable Core Heaters The FP/BFP removable core type flameproof electric heaters comprise a large range of process immersion heaters, certified for use in Zone 1 hazardous areas. The heater is designed with removable elements that allow for replacement without the need for drainage of the process vessel. FEATURES Up to 1000kw (larger ratings achieved by a combination of enclosures) Ceramic core type elements are not subject to problems with moisture ingress Removable core type elements to facilitate replacement without draining the vessel (simply open the terminal box) Elements are individually replaceable on site without the need for special tools Anti-condensation heaters fitted if required Suitable and certified for use in high and low ambient temperatures e.g. Middle East and Arctic regions CERTIFICATIONS Certified N2GorGand D to the ATEX Equipment Directive Certified under EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-31 Certified Ex d, Zone 1, Gas Groups IIB or IIC ATEX or IECEx certified (or CSA certified - FP model only) Temperature classifications certified T1 to T6 Terminal box is certified weatherproof to IP66 +44 (0)1953 886200 | [email protected] | www.exheat.com