- Catalogs
- EXHEAT Ltd
- ?FLR? Flameproof Liquid Filled Radiators
?FLR? Flameproof Liquid Filled Radiators
?FLR? Flameproof Liquid Filled Radiators
- Certified under ATEX Directive 94/9/EC.
- Surface temperature limited to meet EN 563 safety requirements.
- Integral preset surface temperature control thermostat.
- Temperature class T6.
- Floor mounting design.
- Long-life Incoloy 825 sheathed rod-type element.
- Filled with a water/glycol mix.
- Suitable for ambient temperatures from -20°C to +40°C.
- Robust construction and weatherproof certified to IP6X.
- Decorative white powder coat finish.
- Manual reset over-temperature cut-out to ensure surface temperature does not exceed 80°C.
- Optional externally adjustable control thermostat.
- Models: FLR1 (1kW), FLR2 (2kW), FLR3 (3kW).
- Dimensions (mm): FLR1 - 540x495x360, FLR2 - 1080x1035x900, FLR3 - 1620x1575x1440.
- Weight (kg): FLR1 - 47, FLR2 - 94, FLR3 - 140.
- Certification: ATEX certified II 2 G/D, Ex’d’ IIC T6 Ex tD A21 IP6X T85°C, EN60079-0, EN60079-1, EN61241-0 & EN61241-1.
- Enclosure: Cast aluminium finished in orange/grey.
- Radiator: Pressed steel with white powder-coated finish.
- Element: Rod-type with high-quality 80/20 nickel chrome resistance wire, compacted in magnesium oxide insulating powder, encased in corrosion-resistant Incoloy 825 metal sheath.
- Controls: Preset radiator surface temperature control thermostat and manual reset safety temperature limiter (optional externally adjustable control thermostat).
- Mounting: Floor standing with welded-on feet and wall retention brackets.
- Voltage: 230V single phase.
Catalog excerpts
The FLR range of liquid filled electrically heated radiators has been specifically designed to provide heating in Zones 1 and 2 or Zone 21 and 22 Hazardous Areas where airborne dust particles are of particular concern. Our ‘FLR‐A’ range comes complete with an externally adjustable control thermostat. FEATURES Certified to meet the ATEX Directive 94/9/EC Surface temperature limited to meet EN 563 safety requirements Integral preset surface temperature control thermostat Temperature class T6 Floor mounting Long life Incoloy 825 sheathed rod‐type element Radiator filled with water/glycol mix Suitable for ambient temperatures from ‐20°C to +40°C Robust construction Certified weatherproof to IP6X Decorative, white powder coat finish Manual reset over‐temperature cut‐out fitted to ensure radiator surface temperature never exceeds 80°C Optional externally adjustable control thermostat TYPICAL APPLICATIONS Ammunition depots Explosive stores Chemical plant warehouses Firework factories Sugar refineries Laboratories
Open the catalog to page 1
Product Specification Dimensions (mm) Model Cast aluminium finished in orange/grey Preset radiator surface temperature control thermostat and manual reset safety temperature limiter (optional externally adjustable control thermostat)
Open the catalog to page 2All EXHEAT Ltd catalogs and technical brochures
Water Heater - FP-U.2 Pages
Thermostat - RFT.2 Pages
Computational Flow Analysis.2 Pages
Computational Flow Analysis2 Pages
EXHEAT Company Brochure32 Pages
Water Line Heaters2 Pages
'FXT'Air Sensing Thermostat2 Pages
'FUH' Flameproof FanHeaters2 Pages
'FWD? FlameproofAirWarmers2 Pages
