RSV 160—450 CHIMNEY FAN
2Pages

Product Information Use The RSV is a mechanical draft fan intended for use as part of a chimney, stack or vent system. The fan ensures a negative pressure in the entire chimney or stack system. Description The fan is installed at the chimney termination point and can be mounted vertically or side-wall vented. Discharge is vertical (horizontal, if side-wall vented) at a high velocity. The fan housing is hinged and the top can be opened for easy service and access to the stack. The RSV fan is for use with gas, LP gas, and oil fired heating appliances. It is approved for use with category I, II, III and IV appliances in systems where flue gas temperatures do not exceed 625°F (329°C) for intermittent operation and 575oF (302oC) for continuous operation. The RSV is a component in the CASV, Chimney Automation System. Material The fan housing is 3/16" cast aluminum. One coat of grey hammerpaint is applied for added corrosion resistance. The backwards curved impeller is cast aluminum. The impeller is dynamically and statically balanced with permanently attached balancing weights. Motor RSV 160-315: Single phase, split capacitor, totally enclosed, Class F insulated, IP54 Protection Class. Sealed ball bearings. Variable Speed. Thermal overload protection. RSV 400-450: Three phase totally enclosed TEFC motor, Class H insulated. Sealed ball bearings. Variable Speed. Thermal overload protection. Standard Equipment • 2"x4" or 4"x4" junction box with cover and conduit • Bird Screen Optional Equipment • 5 Amp or 8 Amp Fan Speed Control • EDrive • EBC 24 Modulating Pressure Controller • EBC 30/31/35 Modulating Pressure Controller • BDC 8 Fan Control Intertek ETL File 514733 Specifications are subject to change without notice. ENERVEX Inc. P: 770.587.3238 1685 Bluegrass Lakes Parkway F: 770.587.4731 Listings The RSV 160-450 Chimney Fan is ETL Listed in the U.S. and Canada under file no. 514733: • UL 705 Standard for Power Ventilators • UL 378 Standard for Draft Equipment • CSA-CAN3-B255-M81-Mechanical Flue Gas Exhausters Complies with and meets Type B, Spark Resistant Construction per AMCA standard 99-0401 classifications of Spark Resistant Construction. Approvals • CE Compliant • The Commonwealth of Massachusetts • The city of Los Angeles, CA (RR 8474) • OSHPD Preapproval Of Manufacturer's Certification (OPM) No. OSP-0343-10 • Manufactured at ISO9001 certified plant Warranty • 2-Year Factory Warranty on entire fan • 10-Year Warranty Against Corrosion Perforation Complete warranty conditions are available from ENERVEX Inc. VENTING DESIGN SOLUTIONS I_\\U

Product InformationSpecifications Model Sound Diagram Model a Top Section b Bottom Section c Motor d Centrifugal Impeller e Inlet for Impeller f Locking Hinge g Bird Screen h Carrying Handle i Wiring Conduit Plume Height Volume (cfm) 1685 Bluegrass Lakes Parkway F: 770.587.4731 VENTING DESIGN SOLUTIONS