IPVB Inline Power Venter
2Pages

Product Information Inline Power Venter IPVB Use The IPVB Power Venter is intended for use as a true in-line draft inducer. It can be installed in-line in the vertical or horizontal section of a chimney or stack. It is specifically designed for applications where reliable and efficient operation, low noise level, low energy consumption, variable speed and compact design are of utmost importance. The IPVB is for use with condensing and noncondensing appliances where flue gas temperatures do not exceed 650°F (344°C) for intermittent operation and 575oF (302oC) for continuous operation. Patent Pending Typical uses are: mechanical venting of gas-fired or oil-fired boilers and water heaters. For indoor or outdoor installation. Commercial grade, totally enclosed (TEFC), variable speed, Class A insulated motor with sealed and permanently lubricated bearings. Thermal overload protection. The IPVB Power Venter is an efficient, hightemperature ventilator with backward-inclined impeller. The ventilator housing is made of stainless steel and equipped with an energy-efficient, totally enclosed, variable speed motor, which is mounted outside the air stream. The design is a Type B, Spark Resistant Construction. The motor and impeller is a complete assembly (drive unit) that can be removed from the fan housing without removing the fan from the stack system. The stack connections are of the flanged connection type and fit most commercial pre-fabricated chimney systems. Slip connection fittings are available. The fan is typically installed hung from ceiling mounting brackets to support the weight. The IPVB is a component in the ENERVEX CASI, Chimney Automation System. Material The housing is made of 316L stainless steel. The impeller is of the backward inclined type made of cast aluminum. Specifications are subject to change without notice. EBC 30 or EBC 12 Modulating Fan Control, Variable Frequency Drive (VFD), PDS, ECO Economizer (integrated) Listings ETL Listed to UL378-Standard for Draft Equipment and CSA B255-Standard for Mechanical Flue Gas Exhausters CE compliant Manufactured at ISO9001 certified plant Complies with and meets Type B, Spark Resistant Construction per AMCA standard 99-0401 classifications of Spark Resistant Construction. Approvals OSHPD Preapproval Of Manufacturer′s Certification (OPM) No. OSP-0343-10 Warranty 2 year factory warranty 10 year warranty against corrosion perforation

Product Information Specifications Model Duct Connection (Nominal) Dimensions Centrifugal Impeller (B-wheel) Motor Type Removal of drive unit ENERVEX Inc. 1685 Bluegrass Lakes Pkwy. Alpharetta, GA 30004 Fan without drive unit P: 770.587.3238 F: 770.587.4731 T: 800.255.2923 info@enervex.com www.enervex.com NOTE: The capacity data above is tested in accordance with ISO Standard 5801-Industial Fans Performance Testing Using Standardized Airways.