1. Catalogs
  2. EXFO
  3. T100S-HP

T100S-HP

T100S-HP

T100S-HP

Product catalog summary
Overview: The T100S-HP is a high-power tunable laser designed for optics laboratories, offering ease of use and affordability without compromising on performance. It is suitable for various applications including telecom testing, interferometry, sensors, spectroscopy, and scientific research.
Key Features:
  • Output Power: Delivers up to 13 dBm, with peak power at 20 mW (13 dBm).
  • Ultra-low Optical Noise: The T100 cavity design minimizes spontaneous emission, enhancing measurement dynamic range.
  • Wavelength Reference: Built-in reference ensures high accuracy, better than ±20 pm.
  • Wavelength Scans: Supports step-by-step or fast scans from 1 to 100 nm/s.
  • Tuning Range: Six models available, covering wavelengths from 1240 nm to 1680 nm.
  • Mode-hop-free Scan: Patented control ensures reliable, mode-hop-free wavelength sweeps.
Applications:
  • Telecom Testing: High dynamic range measurements with ultra-low SSE.
  • Interferometry and Metrology: Suitable for stable and scanning systems.
  • Sensors and Spectroscopy: Features fine scanning and wavelength modulation.
  • Scientific Research: Flexible input/output ports for diverse testing needs.
Specifications:
  • Wavelength Range: Varies by model, from 1240 nm to 1680 nm.
  • Output Power: ≥ 10 dBm over full range, peak ≥ 13 dBm.
  • Signal to Noise Ratio: ≥ 90 dB, typical 100 dB.
  • Stability: Wavelength stability ±5 pm/h, power stability ±0.01 dB/h.
  • Modulation: Low frequency DC to 8 MHz, high frequency 30 kHz to 200 MHz.
  • Communication Interfaces: RS-232C and GPIB.
  • Environmental Conditions: Operates at 15 °C to 30 °C, <80% humidity.
Safety and Compliance: Certified ISO 9001, compliant with EU WEEE directive. Class 1M laser safety classification.
Ordering Information: Models are specified by wavelength range and fiber type, with options for singlemode or polarization maintaining fiber.
See more

Catalog excerpts

T100S-HP-1

Easy-to-use and affordable for all optics laboratories while ensuring that measurements are no longer limited by laser performance. KEY FEATURES 13 dBm output power Ultra-low optical noise Built-in wavelength reference Step-by-step or fast wavelength scans Wide tuning range Active mode-hop-free scan SPEC SHEET HIGH POWER TUNABLE LASER

 Open the catalog to page 1
T100S-HP-2

INNOVATIVE TUNABLE LASER DESIGN The T100S-HP tunable lasers combine long-term reliability with uncompromising specifications. This laser delivers high output power across its full tuning range with ultra-low SSE noise. This is an easy-to-use, affordable instrument for all optics laboratories which ensures that your measurements are no longer limited by laser performance. KEY FEATURES 13 dBm output power The T100S-HP provides the highest fiber-coupled output power of any comparable tunable laser on the market today. Essential models emit over 10 mW (10 dBm) over their entire tuning range. Peak...

 Open the catalog to page 2
T100S-HP-3

All specifications are given after 60 minutes warm-up and apply for wavelengths not equal to any water absorption. Notes a. Measured over a 0.1 nm bandwidth ±1 nm from the signal. b. For output power > 0 dBm. c. Over one hour at constant temperature. d. RIN within the range 100 MHz-3 GHz measured at 8 dBm output power with RBW = 30 kHz. e. O and CL at 10 dBm. Others at 8 dBm, ±40 pm all at 0 dBm. f. Validated at 0 and 10 dBm for essential and 0 and 8 dBm for extended range models. g. Over 100 wavelength scans at constant temperature. h. GPIB tested and validated with National Instruments GPIB...

 Open the catalog to page 3
T100S-HP-4

COMPLETE TEST SOLUTION T100S-HP lasers are designed to be integrated with EXFO’s CT440 and CTP10 component testing solutions. For more information about these passive optical component testing solutions, please refer to the corresponding specification sheet. ORDERING INFORMATION T100S-HP-XX-XX Wavelength range O+ = 1240–1380 nm O = 1260–1360 nm ES = 1350–1510 nm SCL = 1440–1640 nm CL = 1500–1630 nm CLU = 1500–1680 nm Output fiber 00 = SMF28 singlemode fiber M = Polarization maintaining fiber EXFO Headquarters Tel.: +1 418 683-0211 | Toll-free: +1 800 663-3936 (USA and Canada) | Fax: +1 418 683-2170...

 Open the catalog to page 4

All EXFO catalogs and technical brochures

  1. IQS/FLS-2600B

    7  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.