SyncWatch-110 Synchronization Testing Unit SyncWatch-110 is a highly versatile test and monitoring system for next-generation synchronization technologies, including performance assessment of SyncE and Precision Time Protocol (IEEE 1588v2) KEY FEATURES Fully integrated solution for performance validation of IEEE 1588v2, SyncE and traditional TDM synchronization technologies Highly exible with support for multiple built-in measurement interfaces Adapted to lab and eld environments with optional internal measurement references—GPS and internal rubidium Addressing network synchronization for network turn-up, monitoring and troubleshooting applications through three modes of operation: Stand-Alone, Managed and USB mode SPEC SHEET QUALIFYING, TROUBLESHOOTING AND MONITORING NEXT-GEN NETWORK SYNCHRONIZATION

SyncWatch-110 Synchronization Testing Unit COMPREHENSIVE SYNCHRONIZATION TESTING The SyncWatch-110 Synchronization Testing Unit is designed for accurate measurement and monitoring of a wide range of synchronization technologies, covering the complete network lifecycle. Its flexible architecture, which can be adapted to multiple deployment scenarios, makes the SynchWatch-110 a highly versatile, all-in-one solution. SyncWatch-110 is purpose-built for qualifying and monitoring next-generation networks that use Precision Time Protocol 1588v2 or SyncE technologies, as well as traditional TDM and frequency...

SyncWatch-110 Synchronization Testing Unit ASSESSING THE SYNCHRONIZATION HEALTH THROUGHOUT THE NETWORK LIFECYCLE The different modes of operation of the SyncWatch-110 address the varying requirements for synchronization testing throughout the entire network lifecycle. Network equipment manufacturers (NEMs), mobile operators and mobile backhaul service providers can use the SyncWatch-110 for the turn-up, installation, monitoring and troubleshooting phases of the synchronization network. Key applications: › R&D engineering labs and network planning › Synchronization service turn-up › Service monitoring...

SyncWatch-110 Synchronization Testing Unit GENERAL SPECIFICATIONS Size (H x W x D) Temperature operating storage Screw terminal block -40 to -72 VDC including tolerances Probe power supply –40 to –72 VDC 30 W maximum (with Rb GPS option) 15 W maximum (without Rb GPS option) ORDERING INFORMATION SyncWatch-110-XX-XX Hardware Options 00 = Without hardware options PTP = PTP, 1588v2 hardware option GSM-GPRS = GSM/GPRS modem hardware option PTP-GSM-GPRS = PTP, 1588v2 hardware option and GSM/GPRS modem hardware option Model SyncWatch-110 = Synchronization test unit SyncWatch-110-RB = Synchronization...