Catalog excerpts
Feature(s) of this product is/are protected by one or more of : US patents 6,612,750; US patents 8,373,852; US patent 6,636,306 and equivalent patents pending and granted in other countries; US patent 8,358,930 and equivalent patents pending and granted in other countries; US patent 8,787,753; US patent 8,364,034 and equivalent patents pending and granted in other countries; US patent 9,438,336 and equivalent patents pending and/or granted in other countries; patent appl. US 2014/0086574 A1; and US design patent D737,429. Highly accurate, easy-to-use intelligent optical spectrum analyzers (OSAs) for current and next-generation networks. KEY FEATURES Pol-Mux OSNR measurement capability for 40G and 100G coherent signals, compliant with the IEC 61282-12 standard (under revision) Compliant with Recommendation ITU-T G.697 Fast, accurate scans—no compromise on dynamic range or resolution bandwidth Flexibility to analyze WDMs, EDFAs, drift, spectral transmittance, FP and DFB lasers GPIB or LAN remote control using SCPI commands Automatic impairment identification for faster troubleshooting One-button operation for easy setup and automatic measurement COMPLEMENTARY PRODUCTS High-Speed Multiservice Test Module IQS-88100NGE Power Blazer SPEC SHEET IQS-5240S-P/BP Optical Spectrum Analyzer
Open the catalog to page 1IQS-5240S-P/BP Optical Spectrum Analyzers UNIQUE POL-MUX OSNR MEASUREMENT TECHNOLOGY OSNR has long been recognized as a key performance indicator in wavelength-division multiplexing (WDM) networks, because it provides a multichannel assessment of signal quality in a very short period of time. In addition, OSNR can predict bit error rate (BER) within just a few minutes, while typical BER tests must run for hours or days. The IEC 61280-2-9 standard defines OSNR measurement as the power ratio between the signal power and the noise at half the distance between the peaks. However, in ROADM or 40...
Open the catalog to page 2IQS-5240S-P/BP Optical Spectrum Analyzers ANALYZE ANY WDM NETWORK The IQS-5240S-P/BP OSA series covers your DWDM applications and all channel spacings from 12.5 GHz DWDM to CWDM. This is what we call “no-compromise performance,” whatever your network specificities and testing requirements may be. FLEXIBLE AND POWERFUL AUTOMATION Thanks to the IQS-600 platform’s Windows-based open architecture and Ethernet connectivity, the IQS-5240S-P/BP OSA test modules can be easily controlled remotely using SCPI commands. QUICKER SETUPS–EASIER TESTING The application software has been designed to...
Open the catalog to page 3IQS-5240S-P/BP Optical Spectrum Analyzers ADVANCED EDFA ANALYSIS Since amplifiers are critical elements in all networks, it is crucial to ensure that they are optimized, that the gain is well-distributed and that the output power is flat. Now, you can further optimize EDFAs by measuring key parameters such as gain per channel, noise figure, gain flatness and gain slope. More importantly, you can save and print this precious information. DRIFT MEASUREMENTS You can monitor power, wavelength and OSNR over time. Follow the evolution of these critical parameters, set relative or absolute...
Open the catalog to page 4SPECTRAL MEASUREMENT Wavelength range (nm) Wavelength uncertainty (nm) b Reference Resolution bandwidth (FWHM) (nm) f Wavelength linearity (nm) Wavelength repeatability 2a (nm) POWER MEASUREMENT Dynamic range (dBm) (per channel) b Maximum total safe power (dBm) Absolute power uncertainty (dB) i Power repeatability 2a (dB) d, g OPTICAL MEASUREMENT Optical rejection ratio at 1550 nm (dB) at 0.2 nm (25 GHz) at 0.4 nm (50 GHz) Channel spacing PDL at 1550 nm (dB) ORL (dB) IQS-5240S-P/BP Optical Spectrum Analyzers POL-MUX OSNR MEASUREMENT Notes a. All specifications are for a temperature of 23 °C...
Open the catalog to page 5GENERAL SPECIFICATIONS Temperature operating 0 °C to 40 °C (32 °F to 104 °F) Relative humidity 0 % to 95 % noncondensing Connectors EI (EXFO UPC Universal Interface) EA (EXFO APC Universal Interface) Size (H x W x D) IQS-5240S module 125 mm x 112 mm x 282 mm (4 15/16 in x 4 7/i6 in x 11 1/8 in) Weight IQS-5240S module 1.5 kg (3.3 lb) IQS-5240BP module 1.7 kg (3.8 lb) LASER SAFETY ORDERING INFORMATION IQS-5240S-P/BP Optical Spectrum Analyzers SELECTION GUIDE OSA Module CWDM ROADM+ 40 Gbit/s network Class 1 laser product in compliance with standards IEC...
Open the catalog to page 6All EXFO catalogs and technical brochures
-
Timing and synchronization
6 Pages
-
CT440/CT440-PDL
5 Pages
-
T100S-HP
4 Pages
-
FTBx-9150 Optical Switch
4 Pages
-
Ethernet Testing
24 Pages
-
RESTful HTTP WebRTC Testing
5 Pages
-
IQS/FLS-2600B
7 Pages
-
iQS-2100/FlS-2100
7 Pages
-
SCM-GbE Interface
4 Pages
-
TravelHawk Portable Analyzer
6 Pages
-
ETS-1000G Ethernet Analyzer
6 Pages
-
FLS-140 Visual Fault Locator
2 Pages
Archived catalogs
-
ETS-1000 Ethernet Analyzer
8 Pages
-
IQS-9100 Optical Switch
4 Pages
-
BrixCall
2 Pages
-
Brix 4100 Series Verifier
2 Pages
-
Brix 100 Series Verifier
2 Pages
-
AXS-100 Handheld OTDR Series
8 Pages