Catalog excerpts
FTB-88100NGE/88100G Power Blazer Series Turnkey eld-test solution for deploying, validating and troubleshooting networks up to 100G. KEY FEATURES AND BENEFITS 10M-to-100G compact multiservice eld-test solution addressing testing, troubleshooting and performance assessment requirements of next-generation networks Unprecedented testing simplicity requiring minimum training for new users and maintaining a consistent experience from the lab to the eld Comprehensive and fully integrated test solution covering OTN, Ethernet and SONET/SDH technologies FTB Ecosystem and EXFO Connect-compatible with software upgrade manager, as well as automated cloud-based asset and test data management capabilities Cost-effective, scalable and future-proof solution with FLEX offering: simply point and click to enable any software option, anywhere, anytime—no hardware upgrade, no return to factory required COMPATIBLE PLATFORM OTN, SONET/SDH and Ethernet bit-error-rate testing (BERT) with real-time pass/fail status, quick action buttons, clear results and assorted notications 100% line-rate testing of IP trafc at up to 100G; RFC 2544 (up to 100G) and Y.1564 Ethernet service activation (up to 10G) with full statistics, packet capture, trafc ltering, ping and traceroute Housed either in the four-slot or eight-slot FTB-500 platform and complemented with integrated optical tools, battery operation, power-up and restore, remote access, GPS capabilities and test reports SPEC SHEET HIGH-SPEED MULTISERVICE TEST MODULE
Open the catalog to page 1FTB-88100NGE/88100G Power Blazer Series HIGH-SPEED NETWORK ROLLOUT CHALLENGES SLA CONFORMANCE REDUCING CAPEX AND OPEX ACCELERATING SERVICE TURN-UP Carriers and service providers must support both legacy and packet-based services up to 100G on the same network. Since these services differ and have their own key parameters, the challenge lies in ensuring their service level agreements. For service providers, bandwidth demands are increasing dramatically, while revenues are not. This means cutting equipment costs, reducing truck-rolls and dispatching technicians only when it is critical to do...
Open the catalog to page 2FTB-88100NGE/88100G Power Blazer Series SIMPLIFIED BER TESTING With the FTB-88100NGE Power Blazer, you can preconfigure OTN (from OTU1 to OTU4, including standard and overclocked rates), Ethernet (from 10M to 100G), and SONET/SDH (from OC-3/STM-1 to OC-768/STM-256) bit-error-rate (BER) test parameters prior to arrival at the test site, and then load them from the Favorites menu with one click. The same flexibility is available on the FTB-88100G for supported 40G/100G rates, allowing for simple BER testing with no risk of misconfiguration between two remote sites. Furthermore, the...
Open the catalog to page 3FTB-88100NGE/88100G Power Blazer Series ETHERSAM: ITU-T Y.1564 ETHERNET SERVICE ACTIVATION As 10G and lower-rate Ethernet are the services most activated today, the new ITU-T Y.1564 standard addresses the growing demand for turning up and troubleshooting Carrier Ethernet services. Supported on the FTB-88100NGE Power Blazer module for 10M-to-10G Ethernet client services, this new methodology brings numerous advantages, including validation of critical SLA criteria such as packet jitter and QoS measurements, as well as faster time to service. EXFO’s EtherSAM test suite—based on the ITU-T...
Open the catalog to page 4FTB-88100NGE/88100G Power Blazer Series SIMPLIFIED ERROR INJECTION The FTB-881OONGE and FTB-881OOG Power Blazer modules enable error and alarm injection with a single click from any screen, allowing you to ensure circuit continuity prior to starting a test. This capability applies to single optical channels when addressing testing interfaces from 10M to 10OG on the FTB-881 OONGE and 40G/1 OOG on the FTB-881 OOG, and extends to four or ten optical channels for 40G and 10OG when using parallel CFPs. Furthermore, this functionality can be preprogrammed for any type of error, not just bit...
Open the catalog to page 5FTB-88100NGE/88100G Power Blazer Series DELAY MEASUREMENT Today, carriers have an opportunity to turn optical networks into a competitive advantage by guaranteeing low-latency traffic transmission for delay-sensitive applications including video, cloud computing and financial trading applications. With this in mind, the FTB-88100NGE and FTB-88100G Power Blazer modules enable OTN, SONET/SDH and Ethernet delay measurements across all supported testing interfaces, enabling carriers to solidify their competitive advantage when building low-latency optical transport networks, and guarantee the...
Open the catalog to page 6FTB-88100NGE/88100G Power Blazer Series As part of the IP connectivity tools, the ping tool is used to verify that the user can reach a specific address within or outside of a subnetwork. The traceroute tool is a modified version of the ping tool and is used to determine the route or the number of hops that are required to reach a destination host. These basic tools, which are supported on the FTB-881OONGE and FTB-88100G Power Blazer modules, are essential when testing through 40G/100G routed networks. The results of these tests can pinpoint critical configuration issues within the network....
Open the catalog to page 7FTB-88100NGE/88100G Power Blazer Series 10M-TO-100G KEY FEATURES a Ethernet Rates 10/100/1000M Base-T, 100M (optical) GigE, 10 GigE LAN/WAN, 40 GigE and 100 GigE Power measurement Optical channel power measurement with color indicators Frequency measurement Clock frequency measurements displayed in Hz Service configuration tests, including the ramp and burst tests, as well as the service performance test as per ITU-T Y.1564 up to 10G; tests can be performed in loopback or dual test set mode for bidirectional results Throughput, back-to-back, frame loss and latency measurements according to...
Open the catalog to page 8FTB-88100NGE/88100G Power Blazer Series 10M-TO-100G KEY FEATURES (CONT’D) a OTN Rates Power measurement Optical channel power measurement with color indicators Frequency measurement Clock frequency measurements displayed in Hz Frequency offset Offsetting of the transmitted signal’s clock on a selected interface, and monitoring to exercise clock recovery circuitry on network elements Generation and analysis of OTL, OTU, ODU and OPU alarms and errors Forward error correction (FEC) Generation and analysis of FEC correctable and uncorrectable errors Service disruption time (SDT) Measures the...
Open the catalog to page 9All EXFO catalogs and technical brochures
-
Timing and synchronization
6 Pages
-
CT440/CT440-PDL
5 Pages
-
T100S-HP
4 Pages
-
FTBx-9150 Optical Switch
4 Pages
-
Ethernet Testing
24 Pages
-
RESTful HTTP WebRTC Testing
5 Pages
-
IQS/FLS-2600B
7 Pages
-
iQS-2100/FlS-2100
7 Pages
-
SCM-GbE Interface
4 Pages
-
TravelHawk Portable Analyzer
6 Pages
-
ETS-1000G Ethernet Analyzer
6 Pages
-
FLS-140 Visual Fault Locator
2 Pages
Archived catalogs
-
ETS-1000 Ethernet Analyzer
8 Pages
-
IQS-9100 Optical Switch
4 Pages
-
BrixCall
2 Pages
-
Brix 4100 Series Verifier
2 Pages
-
Brix 100 Series Verifier
2 Pages
-
AXS-100 Handheld OTDR Series
8 Pages