The smallest and most cost-effective 10M to 10G Ethernet analyzer on the market for Carrier Ethernet turn-up and troubleshooting. KEY FEATURES A full range of Ethernet link speeds: from 10 Mbit/s up to 10 Gbit/s (LAN and WAN) Packet jitter measurement for qualication of Ethernet transport networks for transmission of delay-sensitive trafc Throughput, back-to-back, latency and frame-loss measurements, as per RFC 2544 (asymmetrical results optional) Loopback modes: layers 1 to 4 Up-to-10 trafc stream generation and analysis, perfect for turning up next-generation Ethernet services EtherBERT™ testing of 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s and 10 Gbit/s Ethernet circuits Multiprotocol label switching (MPLS) support for Carrier Ethernet Operations, administration and maintenance (OAM) testing: 802.3ah Intelligent discovery of existing ETS-1000, ETS-1000L and ETS-1000G on a network with loopback to them TCP/IP network conguration test suite and troubleshooting tools: includes TCP client, DNS lookup, ARP monitor, MAC, VLAN and IP ooding, ping and traceroute Remote-control capability SPEC SHEET ETHERNET ANALYZER

FIELD ASSESSMENT OF CARRIER ETHERNET SERVICES EXFO's ETS-1000G is the smallest and most cost-effective 10M to 10G Ethernet analyzer on the market. This analyzer enables service providers to turn up and troubleshoot next-generation Carrier Ethernet services. Its compact size, combined with a complete feature set, makes it the perfect tool for field technicians who need to reliably validate service-level agreements (SLAs) for Ethernet- based services. Using this analyzer, technicians can transmit up to layer-4 traffic with fully configurable virtual local area networks (VLANs), multiprotocol label...

EtherBERT The ETS-1000G’s bit-error-rate test feature makes it possible to switch from a frame-based error measurement to a bit-error-rate measurement. The BERT can be performed at physical, data link, network and transport layers using standard and user-defined sequences. This feature also allows for generation of static as well as random frame sizes. MPLS Testing The MPLS testing option allows for generation of traffic with up to three MPLS labels. RFC 2544, multistream and BER tests can be performed with MPLS traffic, enabling field technicians to test within the MPLS network and verify proper...

ETS-1000G SFP+ INTERFACE a Transceiver Type Maximum reach Tx operational wavelength range (nm) Maximum Rx before damage (dBm) Laser type Electrical interfaces Duplex mode Half and full duplex Half and full duplex Full duplex ELECTRICAL INTERFACE

FUNCTIONAL SPECIFICATIONS TESTING RFC 2544 Throughput, back-to-back, frame-loss and latency measurements according to RFC 2544 (option for asymmetrical results). Frame size: RFC-defined sizes, user-configurable. Layer 1 to layer 4 with or without VLAN and MPLS. Traffic generation with static and random frame size (from 64 to 9600 bytes). Patterns (BERT) CRTP, PRBS 2E11-1, PRBS 2E15-1, PRBS 2E20-1, PRBS 2E23-1, PRBS 2E29-1, PRBS 2E31-1 and user patterns Error measurement Error measurement (BERT) Bit error, LSS and LOS Ability to transmit and analyze up to 10 streams. Multistream generation and...

ORDERING INFORMATION ETS-1000G-XX Software options XMPLS = MPLS Ability to generate and analyze traffic with MPLS XAT = Asymmetrical RFC 2544 Ability to perform asymmetric RFC 2544 and BERT XADV = Advanced IP Testing MAC and VLAN flooding Example: ETS-1000G-XADV EXFO Headquarters Tel.: +1 418 683-0211 | Toll-free: +1 800 663-3936 (USA and Canada) | Fax: +1 418 683-2170 | [email protected] | www.EXFO.com EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to www.EXFO.com/contact. EXFO is certified ISO 9001 and attests to the quality of these...