*mydirectindustry

SmartIRt/c

Product catalog summary

Overview: The SmartIRt/c series offers advanced infrared temperature sensors with features such as smart air purge, continuous auto calibration, and digital systems. These sensors are designed for easy installation and are cost-effective with a range of outputs and temperature capabilities.

Key Features:

Maintenance-free accuracy with smart air purge.
Continuous auto calibration for reliable performance.
Digital system with robust housing against shocks.
Emissivity shift and ambient radiation correction.
Plug and play installation.
Available optics from 3:1 to 40:1 field of view.
Outputs include 0-5V, 0-10V, 4-20mA, and RS232.
Temperature range from 32°F to 1832°F (0°C to 1000°C).
Custom scaling for low emissivity materials.

Specifications:

Temperature accuracy varies by model, with a general accuracy of ±1°C or 1% for lower ranges and ±2°C or 2% for higher ranges.
Interchangeability is ±1°C or 0.5% for most models.
Output impedance is 750 ohms for voltage models, with a minimum load impedance of 100 K ohms.
Power consumption is less than 800 mW at 24 VDC and less than 600 mW at 12 VDC.

Mechanical Specifications:

Constructed with heavy-duty alloy casting.
Weight is approximately 8 oz (227 g).
Operating ambient temperature range is 0 to 70°C (32 to 158°F).
Storage temperature range is -10 to 70°C (14 to 158°F).
Relative humidity tolerance is 95% non-condensing.

Ordering Information: Models are specified by field of view, power, output, and temperature range. Options include ambient temperature output. Example: SmartIRt/c.3-24V-420-250C for a 3:1 FOV, 24VDC power, 4-20mA output, and 0-250°C range.

Catalog excerpts

POWERED SmartIRt/c SERIES DATASHEET SmartIRt/c HIGHLIGHTS • • • • • • • • • • • • Smart air purge assures maintenance free long term accuracy Smart continuous auto calibration All digital system Smart housing resists mechanical and thermal shocks Smart emissivity shift and ambient radiation correction Easy plug and play installation Lowest cost air purged, linearized sensor on the market Optics from 3:1 to 40:1 available Outputs of 0-5V, 0-10V, 4-20mA, & RS232 Temperature ranges from 32 - 1832 °F (0 - 1000 °C) LOW impedance, results in no offset errors due to leakage current in your input device Custom scaling and programming for low emissivity materials and low temperatures available MEASUREMENT SPECIFICATIONS Temperature Range OUTLINE DRAWING EXERGEN Corporation ♦ Watertown, MA 02472 USA ♦ 617-923-9900 (F) 617-923-9911 www.exergen.com/industrl for the NEWEST information on all products, technotes and press releases.

Open the catalog to page 1

ELECTRICAL SPECIFICATIONS SmartIRt/c.3 LINEAR TEMPERATURE RANGES (custom scaling also available upon request) UPDATE TIME FIRST READING UPON POWER UP EMISSIVITY SETTING 0.90 (custom low emissivity settings available for metals, etc. upon request) SPECTRAL RESPONSE 5.5 to 20 microns (other ranges available for specific applications, thin films, etc.) 12 or 24 VDC (10%). Shuts off when voltage is functionally low. OUTPUT IMPEDANCE MINIMUM LOAD IMPEDANCE MAXIMUM LOOP IMPEDANCE 50 ohm max (250 and 500 ohm max available upon request) POWER CONSUMPTION MECHANICAL SPECIFICATIONS SmartIRt/c.3 MINIMUM...

Open the catalog to page 2

SmartIRt/c

SmartIRt/c

Catalog excerpts

All Exergen Global catalogs and technical brochures