OmniCure R2000 Radiometer Your Technology Advantage for a Repeatable UV Process Accurate radiometry is essential to maintaining a calibrated and repeatable UV curing process suitable for consistent, high-quality production. The OmniCure® R2000 Radiometer is the most advanced and accurate tool for measuring irradiance or power from your UV Spot Curing System. The portable OmniCure R2000 can be combined with the OmniCure S2000 system to provide a complete curing station with unmatched control and repeatability. Maintain process control and save setup time by calibrating multiple systems with a preferred irradiance set point Achieve accurate wideband measurements with our proprietary detector systems Virtually eliminate beam profile dependance and significantly improve measurement accuracy through our proprietary optical interface Store data and communicate with PC software for downloading Ready for use with additional custom accessories such as the Cure Ring and the Cure Site Detectors

Maximum Flexibility and Process Control OmniCure R2000 Radiometer Expanding Your Options Proximity Adaptor Lamp Output Adaptor Cure Ring Detector Cure Site Detector The proximity adaptor allows the user to obtain accurate applicationspecific power or irradiance measurements in flood geometry. Measurements are done by placing the emitting end of the light directly over the top of the proximity adaptor, inserted into the OmniCure® R2000 Radiometer. The lamp output adaptor is a rigid adaptor that interfaces the curing unit and light source to allow direct measurements of the lamp power. This optical...