MODEL 9450 double ACTING Model 9450 DA MMD (3.500” Diameter Major Component Cylinder) shown with optional Linear Encoder and S-432A Articulating Arm Meter/Mix & Dispense System featuring disposable no-purge static mixing Designed for intermittent or continuous dispensing of two component epoxies, urethanes, silicones and others. • Double acting design allows for intermittent shots or continuous f ow. Standard Features: • Manual (“eyeball”) or controlled dispensing. • Wide range of bore sizes and ratios to satisfy your production requirements. • Mixer manifold isolates materials until they enter the disposable mixer. • Positive displacement piston metering ensures consistent, accurate delivery of A and B materials. Ratio is assured by honed cylinder diameters. • Inexpensive disposable mixing. No solvents. • Linked Diverter Valves eliminate problems caused by check valves. • Multiple small shots from a single stroke means low cycle rate and improved wear. • Material is fed from tanks, 5-gallon pails, 55-gallon drums or other bulk containers. Call us today for pricing and ordering information. • Stainless steel, PTFE and hard-coated nickel components ensure long lasting performance, even with abrasive materials. 1130 Rt 1, Newcastle, Maine 04553 USA Tel: 207-563-2299 FAX: 207-563-2619

Engineered Options: • Encoder - For critical applications requiring precise shot size control. Accuracy to .0008" of cylinder stroke. • Systems Integration • Pumps - Wide range available for use with 5 gallon to 55 gallon containers. Air Assist ram for heavy or viscous liquids. - Interfacing of EXACT dispensing equipment with your process • Portable skids/carts - Engineered to your application, offers mobility for remote task requirements • Tanks - Vacuum degassing - 2 to 60 Gallons - Heated blankets to 150º F - Agitation - Nitrogen blanket for moisture sensitive materials - Level controls •...