MODEL 1450 Double ACTING Model 1450 DA MMD (1.500” Diameter Major Component Cylinder) shown with optional Linear Encoder Designed for intermittent oror cont inuous for intermittent continuous dispensing of two component epoxies, of two component epoxies, urethanes, silicones and others. single single • Mult iple small shots from a single stroke Multiple means low cycle rate and improved wear. STANDARD FEATURES • Manual (“eyeball”) or controlled dispensing. • Wide range of bore sizes and ratios to satisfy your production requirements. • Mixer manifold isolates materials until they enter the disposable mixer. • Positive displacement piston metering ensures consistent, accurate delivery of A and B materials. Ratio is assured by honed cylinder diameters. • Inexpensive disposable mixing. No solvents. • Linked Diverter Valves eliminate problems caused by check valves. • Double acting design allows for intermittent shots or continuous f ow. • Material is fed from tanks, 5 gallon pails, 55 gallon drums or other bulk containers. Call us today for pricing and ordering information. • Stainless steel, PTFE and hard coated nickel components is long lasting performance, even with abrasive materials. 1130 Rt 1, Newcastle, Maine 04553 USA Tel: 207-563-2299 FAX: 207-563-2619

Engineered Options: • Encoder - For critical applications requiring precise shot size control. Accuracy to .0008” of cylinder stroke. (.0004 optional) • Systems Integration - Interfacing of Exact dispensing equipment with your process • Portable skids/carts • Pumps - Wide range available for use with 5 gallon to 55 gallon containers. Air Assist ram for heavy or viscous liquids. - Engineered to your application, offers mobility for remote task requirements • Tanks - Vacuum degassing - 5 to 60 Gallons - Heated blankets to 150º F - Agitation - Nitrogen blanket for moisture sensitive materials (i.e....