Catalogs >
EWM GmbH >
Tetrix 230 AC/DC Smart 2.0

Tetrix 230 AC/DC Smart 2.0
2Pages

Catalog excerpts

WE ARE WELDING • Modular AC/DC TIG inverter welding machine, gas- or water-cooled • TIG welding • Features characteristics for EWM activArc and EWM spotArc at no extra charge • TIG welding with reproducible, electronic HF start • TIG lift arc welding without HF • Adjustable AC waveform, sine, trapezoidal, square current • Adjustable AC frequency between 50 Hz and 200 Hz • Adjustable AC balance • TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification • Adjustable pulse frequency and balance • Non-latched/latched operation • Clearly structured operating panel, operating elements streamlined to feature the main TIG functions • Reduced secondary current accessible using torch trigger • Spot welding/tack function (spotArc/spotmatic) • Up-slope/down-slope adjustable • Spotmatic - halves time required for tacking • Adjustable gas pre-flows/post-flows • MMA welding • MMA average value pulsing • MMA average value pulsing • Ideal for root welding • Safe vertical-up welding with MMA pulse • Adjustable hot start current and hot start time • Adjustable Arcforce • Antistick function • Highlights • Safe ignition also for long hose packages • Gas-cooled or optionally water-cooled with cool 40 U31 cooling unit • Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 4-litre water tank (cool 41U31 cooling unit) • Energy-saving thanks to high efficiency and standby function • High mains voltage tolerances and therefore fully generator-compatible • Connection capability for remote control and function torch • Trolly 35.2-2 trolley available for delivery • Mains connection 230 V/16 A • High mains voltage tolerance +15%/-40% and therefore fully generator-compatible • 3.5 m mains lead with 16 A earthed plug • Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage • Scope of supply includes welding machine only; other components such as trolly and cooling unit can be selected from accessories! Setting range for welding current Duty cycle at ambient t.e 40 % 45 % 60 % 100 % Open circuit voltage The content of this document has been prepared and reviewed with all reasonable care. The inform

Open the catalog to page 1

Torch connection Decentral The content of this document has been prepared and reviewed with all reasonable care. The information provided is subject to change, errors excepted.

Open the catalog to page 2

Tetrix 230 AC/DC Smart 2.0 2Pages

Catalog excerpts

All EWM GmbH catalogs and technical brochures

Tetrix 230 AC/DC Smart 2.0
2Pages