WE ARE WELDING • Gas-cooled DC TIG inverter welding machine • TIG welding with reproducible, electronic HF start • TIG lift arc welding without HF • MMA pulse welding and pulsed TIG welding up to 2 kHz • Non-latched/latched operation • Clearly structured operating panel, operating elements streamlined to feature the main TIG functions • Reduced secondary current accessible using torch trigger • Up-slope/down-slope adjustable • Adjustable gas pre-flows/post-flows • MMA welding • Adjustable hot start current and hot start time • Adjustable Arcforce • Antistick function • Energy-saving thanks to high efficiency and standby function • Portable, including shoulder strap • 3.5 m mains supply lead with 16 A shock-proof plug • Mains connection 230 V/16 A • High mains voltage tolerance +15%/-40% and therefore fully generator-compatible • 3.5 m mains lead with 16 A earthed plug • Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage Setting range for welding current Duty cycle at ambient t.e 25 % 35 % 60 % 100 % Open circuit voltage Mains frequency Mains fuses (slow-blow) Mains voltage (tolerances) Max. connected load Recommended generator power cos ^ Efficiency Dimensions machine, LxWxH in mm Weight, machine Torch connection The content of this document has been prepared and reviewed with all reasonable care. The information provided is subject to change, er