Inverter welding machine, DC Very light-weight, only 4,7 kg – housing made of aluminium and impact-resistant plastic Portable, shoulder strap MMA and TIG lift arc welding Cellulose electrodes: 100% safe for vertical-down welding Welding of stick electrodes up to 4 mm Pulsed MMAwelding: especially suitable for root welding outstanding gap bridging with no sagging of the root side fine-flaked weld surface with a TIG look for final passes less finishing work thanks to less spatter ideal for difficult electrodes less distortion thanks to controlled heat input Pulsed TIG welding with up to 2 kHz Connection capability for remote control IP23 spray water protected Arcforce, hot start, antistick Energy efficient due to standby mode 3.5 m mains lead with 16 A earthed plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage MMA Setting range for welding current Duty cycle at ambient t.e 30 % Open circuit voltage Mains frequency Mains fuses (slow-blow) Mains voltage (tolerances) Recommended generator power Dimensions machine, LxWxH in mm Weight, machine Powered by TCPDF (www.tcpdf.org) Tel.: +49 2680 181- 0, Fax.: -244 https://www.ewm-group.com/ The content of this document has been prepared and reviewed with all reasonable care. The information provided is subject to change, errors excepted