HPS III-SXE
8Pages

{{requestButtons}}

Catalog excerpts

HPS III-SXE - 1

Product information HPS III-SXE single tip The solution for single applications

Open the catalog to page 1
HPS III-SXE - 2

The solution for single applications High-performance single tips HPS III-SXE HPS III-SXE single tips with sealing near the gate offer highest process reliability for applications with demanding materials and narrow processing windows. Due to the nozzle design with at least two separate control zones and ceramic elements for additional thermal insulation between pressure tube and nozzle body a most homogeneous temperature profile is achieved. With a maximum processing temperature of 400°C HPS III-SXE single tips are suitable for a broad range of thermoplastics. Gating options for HPS...

Open the catalog to page 2
HPS III-SXE - 3

Features: • Flow channel diameter 6 mm, 9 mm and 12 mm, special sizes on request • Lengths from 30 mm up to 350 mm, depending on flow channel diameter • Nozzle design with 2 control zones, 3 control zones for lengths ≥ 250 mm • Thermal insulation by tip sealing near the gate • Additional thermal insulation by ceramic elements between pressure tube and nozzle body • Molybdenum tips for optimal thermal conductivity and high wear resistance • Tips available with special coating for increased wear resistance • Exchangeable thermocouples, heating elements and tip inserts • Low pressure loss •...

Open the catalog to page 3
HPS III-SXE - 4

Technical data HPS III-SXE HPS III-SXE single tips, 230 V with tip sealing technology Dimensions, flow channel diameters and item numbers Flow channel Ø 6 mm Item number: 93259... Flow channel Ø 9 mm Item number: 93309... Flow channel Ø 12 mm Item number: 93409... Available tip/screw-on gate bush combinations with tip Ordering example Example: Single tip 93259..., flow channel Ø 6 mm 93259.039-040-A Tip/screw-on gate bush combination R X dim. Nozzle body Special sizes on request The gate bush is not included and has to be ordered separately. Please refer to our main catalogue. For item...

Open the catalog to page 4
HPS III-SXE - 5

Locating rings HPS III-SXE Item number Item number

Open the catalog to page 5
HPS III-SXE - 6

Locating rings HPS III-SXE Locating ring for 93409... Installation for nozzles with 2 control zones (X dimension < 250 mm) Installation for nozzles with 3 control zones (X dimension ≥ 250 mm)

Open the catalog to page 6
HPS III-SXE - 7

HPS lll-SXE with flow channel diameter 6 mm and 9 mm The connecting socket 63010.009 (10-pin) is used. HPS lll-SXE with flow channel diameter 12 mm and larger (Nozzle type 93409... and special sizes) 2 control zones for lengths up to 200 mm. The connecting socket 63010.009 (10-pin) is used. 3 control zones for lengths > 250 mm. The power cables are connected to socket 63010.009 (10-pin), the thermocouple cables are connected to socket 63110.009 (10-pin). The connecting socket is not included and has to be ordered separately. Please follow the wiring instructions below. black + / white -...

Open the catalog to page 7
HPS III-SXE - 8

Your EWIKON partner: Technical information subject to alteration.

Open the catalog to page 8

All EWIKON Heißkanalsysteme GmbH catalogs and technical brochures

  1. Product guide

    26 Pages

  2. HPS III-FleX

    20 Pages

  3. L2X

    8 Pages

  4. HPS III-MH

    74 Pages

  5. HPS-C 2011

    20 Pages