- Catalogs
- EWIKON Heißkanalsysteme GmbH
- HPS III-S valve gate nozzle Ø 9 mm
HPS III-S valve gate nozzle Ø 9 mm
HPS III-S valve gate nozzle Ø 9 mm
- Valve Gate Nozzles: Diameter of 9 mm, available in standard (NV95308-V01) and front installation (NV95309-V01) configurations.
- Valve Pins: Diameter of 3.2 mm stepped to 3 mm, selection is order-related by EWIKON.
- Drive Units: Includes electric drive unit with encoder (19888) and pneumatic drive units (19767, 19758) placed on manifold.
- Manifold Systems: EWIKON HPS III, 1 level, with a machine radius of 40.
- Temperature Specifications: Suitable for processing temperatures ≥ 250°C and < 250°C, depending on the configuration.
- Assembly Notes: General assembly notes are provided for the installation of valve gate systems with external drive units.
- Installation Components: Includes insulating plate, clamping plate, nozzle retainer frame plate, and additional heater band.
- Ensure the maximum permissible environmental temperature for drive units does not exceed 70°C.
- Selection of valve pin seals and other components should be order-related and specified by EWIKON.
- For applications with processing temperatures ≥ 250°C, use pressure pads with ceramic rings.
- For applications with processing temperatures < 250°C, use pressure pads without ceramic rings.
- The document details valve gate nozzle specifications with a diameter of 9 mm, available in versions -D2V, -D3V, and -D7V, including standard and front installation options.
- Ordering information includes examples specifying type, dimensions, and valve pin diameter in the gate area, noting that gate exchange inserts should be ordered separately.
- General assembly instructions are provided for the installation of the nozzle body and shaft, with specific guidance for both standard and front installations.
- Installation geometry is outlined, recommending pre-machining and hardening to 52 HRC before finalizing gate geometries and fittings.
- Additional components include screw-on gate bushes with a standard gate diameter of 2.5 mm, with possible variations from 1.3 to 3.0 mm.
- Tolerances for form and location of the valve gate nozzle are specified to ensure precise manufacturing and assembly.
Catalog excerpts
NVI Nadelverschlussdüsen Valve gate nozzles Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit NVE Ø 9 mm Nadelverschlussdüse Valve gate nozzle Inhalt / Content Form- und Lagetoleranzen Form and location tolerances Alle Maße in diesem Katalog beziehen sich auf EWIKON Heißkanalkomponenten im aufgeheizten Betriebszustand All dimensions in this catalogue refer to EWIKON hotrunner components in heated operating condition NVE Antriebseinheiten Drive units Schraubvorkammerbuchsen Screw-on gate bushes NVE Verteilersysteme Manifold systems NVE Druckstücke und Zubehör Pressure pads and accessories 3 4 - 38 Einbauhinweise Nadelverschlussdüse Ø 9 mm Assembly notes for valve gate nozzle Ø 9 mm Allgemeine Einbauhinweise General assembly notes 2 2 - 33 Nadelverschlussdüse Ø 9 mm Valve gate nozzle Ø 9 mm Nadelverschlussdüse Ø 9 mm Valve gate nozzle Ø 9 mm 2 - 21 Übersicht Systemvarianten für Nadelverschlussdüse Ø 9 mm Overview of system versions for valv
Open the catalog to page 1
HPS III-NVE - 230V Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit EWIKON Nadelverschlussduse 0 9 mm Valve gate nozzle 0 9 mm Beispiel fur Example for pneumatischen Antrieb pneumatic drive unit in Aufspannplatte in clamping plate NV95308-V01... Standard installation NV95309-V01... Front installation Drive: 19710 Pneumatic drive unit 3 Nozzle retainer frame plate 5 19710 Pneumatic drive unit 22554-... Nadeldichtung (Auswahl auftragsbezogen durch EWIKON) 7 17339 Druckstuck 0 3 mm siehe Duse (Auswahl auftragsbezogen durch EWIKON) 22554-... Valve pin seal (Selection...
Open the catalog to page 2
NVI Nadelverschlussdüsen Valve gate nozzles Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit Valve gate nozzle Ø 9 mm Example for pneumatic drive unit in clamping plate NVE Ø 9 mm Nadelverschlussdüse Valve gate nozzle Beispiel für pneumatischen Antrieb in Aufspannplatte NVE Antriebseinheiten Drive units NVE Verteilersysteme Manifold systems NVE Druckstücke und Zubehör Pressure pads and accessories Allgemeine Einbauhinweise General assembly notes
Open the catalog to page 3
HPS III-NVE - 230V Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit EWIKON Nadelverschlussduse 0 9 mm Valve gate nozzle 0 9 mm Beispiel fur Example for hydraulischen Antrieb hydraulic drive unit in Aufspannplatte in clamping plate NV95308-V01... Standard installation NV95309-V01... Front installation Drive: 19730 Hydraulic drive unit 3 Nozzle retainer frame plate 5 19730 Hydraulic drive unit 22554-... Nadeldichtung (Auswahl auftragsbezogen durch EWIKON) 7 17339 Druckstuck 0 3 mm siehe Duse (Auswahl auftragsbezogen durch EWIKON) 22554-... Valve pin seal (Selection...
Open the catalog to page 4
HPS III-NVE - 230V Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit hydraulischen Antrieb hydraulic drive unit in Aufspannplatte in clamping plate
Open the catalog to page 5
HPS III-NVE - 230V Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit Nadelverschlussduse 0 9 mm Beispiel fur elektrischen Antrieb mit Encoder in Aufspannplatte Valve gate nozzle 0 9 mm Example for electric drive unit with encoder in clamping plate NV95308-V01... Standardmontage NV95309-V01... Frontmontage Nadel: 0 3 mm Antrieb: 19888 Antriebseinheit mit Encoder NV95308-V01... Standard installation NV95309-V01... Front installation Drive: 19888 Electric drive unit with encoder 4 Nozzle retainer frame plate 6 19888 Electric drive unit with encoder 22554-......
Open the catalog to page 6
NVI Nadelverschlussdüsen Valve gate nozzles Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit Valve gate nozzle Ø 9 mm Example for electric drive unit with encoder in clamping plate NVE Ø 9 mm Nadelverschlussdüse Valve gate nozzle Beispiel für elektrischen Antrieb mit Encoder in Aufspannplatte NVE Antriebseinheiten Drive units NVE Verteilersysteme Manifold systems NVE Druckstücke und Zubehör Pressure pads and accessories Allgemeine Einbauhinweise General assembly notes
Open the catalog to page 7
HPS III-NVE - 230V Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit EWIKON Nadelverschlussduse 0 9 mm Valve gate nozzle 0 9 mm Beispiel fur Example for elektrischen Antrieb mit Encoder electric drive unit with encoder in Aufspannplatte in clamping plate NV95308-V01... Standardmontage NV95309-V01... Frontmontage Nadel: 0 3 mm Antrieb: 19888 Antriebseinheit mit Encoder NV95308-V01... Standard installation NV95309-V01... Front installation Drive: 19888 Electric drive unit with encoder 4 Nozzle retainer frame plate 6 19888 Electric drive unit with encoder 22554-......
Open the catalog to page 8
NVI Nadelverschlussdüsen Valve gate nozzles Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit Valve gate nozzle Ø 9 mm Example for electric drive unit with encoder in clamping plate NVE Ø 9 mm Nadelverschlussdüse Valve gate nozzle Beispiel für elektrischen Antrieb mit Encoder in Aufspannplatte NVE Antriebseinheiten Drive units NVE Verteilersysteme Manifold systems NVE Druckstücke und Zubehör Pressure pads and accessories ACHTUNG / ATTENTION Die maximal zulässige Umgebungstemperatur der Antriebe beträgt 70 °C. The maximum permissible environmental temperature...
Open the catalog to page 9
HPS III-NVE - 230V Nadelverschlusssysteme mit externem Antrieb Valve gate systems with external drive unit Nadelverschlussduse 0 9 mm Beispiel fur pneumatischen Antrieb auf dem Verteiler (mitgeschleppt) NV95308-V01... Standardmontage NV95309-V01... Frontmontage Nadel: 0 3 mm NV95308-V01... Standard installation NV95309-V01... Front installation Valve pin: 0 3 mm Drive: 19767 Pneumatic drive unit 22554-... Nadeldichtung (Auswahl auftragsbezogen durch EWIKON) 10 19116 Druckstuck mit Keramikring fur Verarbeitungstemperaturen > 250°C 11 22873-... Nadel 0 3,2 mm, abgesetzt auf 0 3 mm siehe Duse (Auswahl...
Open the catalog to page 10All EWIKON Heißkanalsysteme GmbH catalogs and technical brochures
L2X Drop-In System 202415 Pages
Archived catalogs
Hotline October 2015 online8 Pages
HPS III-SXE8 Pages
HPS-C 201120 Pages
HPS III-MV multi-tip nozzles12 Pages
Slim high performance nozzle2 Pages
Hotline May 2015 online8 Pages
HPS III-S nozzles Ø 4.5 mm20 Pages
HPS III-S nozzles Ø 9 mm22 Pages
HPS III-S open nozzle Ø 18 mm16 Pages
Product guide26 Pages
HPS-C hotrunner controllers2 Pages
Mechanical gap filter6 Pages
New "Hotline" online8 Pages
HPS III-FleX20 Pages
HPS III-S nozzles Ø 6 mm22 Pages
L2X8 Pages
HPS III-S nozzles Ø 12 mm22 Pages
HPS III-S nozzles Ø 3 mm20 Pages
HPS III-MH74 Pages
- Digital temperature control
- Liquid nozzle
- Stainless steel nozzle
- Metal nozzle
- Multi-jet nozzle
- Screw-in single nozzle
- Temperature control unit
- Digital temperature control unit
- Compact nozzle
- Injection nozzle
- Hot runner nozzle
- Process temperature control unit
- Nozzle for pharmaceutical applications
- Air-operated nozzle
- Remote control unit
- Compact control unit
- Automation temperature control unit
- Hot runner system
- Temperature control unit with touchscreen
- Hydraulic nozzle