Catalogs >
EWELLIX >
Telescopic pillar CPMT

Telescopic pillar CPMT
1 / 8Pages

Catalog excerpts

Telescopic pillar CPMT High stroke High load capacity High safety and reliability Design flexibility

Telescopic pillars Benefits • Low retracted height • High stroke • High load capacity • High safety and reliability • Design flexibility Standards • IEC 60601-1:2005 • ANSI/AAMI ES60601-1:2005 • IEC 60601-1-2:2007 Technical data Dynamic bending moment Nm up to 45031 up to 1 20031 up to 55031 up to 1 40031 1) Compliant with static load according to IEC 60601-2-46:2010 2) Static tensile safety factor to prevent mechanical hazard according to IEC 60601-1:2005 3) For details, see offset load diagrams page 4)

Open the catalog to page 2

Dimensional drawing Conﬁguration options DIN8 or flying leads cable for connector flexibility Suitable control units and accessories Operating switches DIN8 connector pins Limit switches Green Yellow

Open the catalog to page 3

Oﬀset load diagrams CPMT1-1S, -2S Offset load at full extension Offset load at full extension Load distance from the center of the pillar [mm] Load distance from the center of the pillar [mm] For medical procedure equipment Current [A] 14 12 10

Open the catalog to page 4

EWELLIX Mounting details Additional attachment options M10 Base^ plate Optional threads on outer tube section can be configured for additional attachment options. Please contact Ewellix for more details. • Choice in size and position • High strength to support attached actuators The pillar must be mounted on a plane and rigid surface by 4 screws M10 (accessory) with a screw in depth of 25 to 35 mm in the pillar. Description Part number Control Unit SCU (3 or 6 ports) SCUXX-003XXX-000 Control Unit VCU (3 or 5 ports) VCUXX-003XX0-000 Control Unit BCU (3 ports) BCUX3-XX3100-0000 Foot switch...

Open the catalog to page 5

Telescopic pillars Stroke length (mm) 300 mm Only for retracted length M 300 350 mm Only for retracted length M 350 Other per 10 mm from 300 mm (or 400 mm for retracted length S) to 600 mm -- Electrical options 2-Hall encoder, end limit switches F Cable options - 1 m DIN8 cable 2,3 m DIN8 cable 2,3 m flying leads cable Options shown in yellow are only available on request. Contact Ewellix for more information on minimum quantities and additional costs.

Open the catalog to page 6

ewellix.com © Ewellix All contents of this publication are the property of Ewellix, and may not be reproduced or given to third parties (even extracts) without permission. Although great care has been taken in the production of this catalog, Ewellix does not take any responsibility for damage or other loss resulting from omissions or typographical errors. The photo may diﬀer slightly in appearance from the actual product. Due to continuous improvements being made in our products, the product’s appearance and speciﬁcations are subject to change without notice. PUB IL-07007-EN-October 2019...

Open the catalog to page 8

Telescopic pillar CPMT 1 / 8Pages

Catalog excerpts

All EWELLIX catalogs and technical brochures

Telescopic pillar CPMT
1 / 8Pages