we cover your robot PROTECTIVE COVERS IN WELDING PROCESSES Industrial robots working in welding processes are exposed to hot weld spatter, sparks and a high amount of dust. The layer of metal oxides appearing on the hot parts of the machines because of their contact with air accumulates over time, creating a layer that is difficult to remove. Weld scale can appear on the surface of the robot. Hot particle splashes and radiant heat can damage the cables and conduits on the robot, while the dust getting inside the moving parts can block them and cause malfunctions. This results in the production line being stopped to repair the machine. EVO_heat line covers are made of non-flammable fabrics, resistant to high temperatures. This feature allows them to protect industrial robots and machines from splashes of hot particles and sparks generated in the welding process. The cover also prevent cable burning and accumulation of weld scale on the robot surface. If the robot is exposed to radiant heat, the covers are produced from fabrics with reflexive properties, which reflect part of heat radiation, helping protect the machine from overheating. What benefits you can have by using protective coverS Protect the robot subassemblies – covers shield not only the robot surface, but also its internal mechanisms Gain workplace safety, as well as time and money thanks to continuous, reliable work of the machine Reduce spending on cleaning, repairs and servicing of the machines Maintain order in the workplace by keeping it clean and well-organized Maintain production continuity and increase the safety level by protecting most vulnerable parts of the robot Ensure safety of automated processes in particularly difficult environment, e.g. shotblasting or metal casting Reduce the frequency of servicing and extend the lifetime of the robot Reduce the unplanned downtime and production line malfunctions Save time usually spent on workplace cleaning, repairs and servicing of the machine – let your employees perform other tasks Reduce the risk of malfunctions and need for repair

we cover your robot PROTECTIVE COVERS FOR WELDING TONGS WORKING WITH A KUKA ROBOT The process of metal spot welding can be conducted in a fully automated way thanks to industrial robots with welding tongs installed on their wrists. The process generates many sparks and hot spatter which would accumulate on the tool, burning cables and causing its accelerated degradation. What is more, the dust from the process would get inside the moving parts of the tool, increasing friction and causing blockage. In order to make the process more efficient, a custom protective cover for the welding tongs hasbeen...