SmartCam Optical Q-check Quality check during the forming process The SmartCam evoVIU was mainly developed for detecting respectively measuring special quality characteristics during the material processing in the forming press. Thanks to the robust and thin design as well as the integrated fully configurable lighting and the TOF-autofocus the camera can take images from defined regions inline. Moreover the camera is equipped for outdoor use At a glance: • SmartCam with a robust design • Fully configurable Internal lighting • Various connection possibilities • Autofocus with Integrated TOFmeasurement thanks to the IP67 protection. Through a big variety of different interfaces (Ethernet, Wifi, IO-Link, LTE with 5G-Ready) the results can be passed to the corresponding endpoint. All these functions are combined through the platform evoVIU on the camera, a graphical fully web based intuitive tool for image progressing. It’s also possible for an operator not specialised to image processing or programming • Webbased App for configuration of evoVIU • Integrated display for visualization of the current settings to create and run new customised flows. . Further information and videos can be found here: evopro systems engineering AG Im Gewerbepark A 52 D – 93059 Regensburg

TECHNICAL SPECIFICATIONS evoVIU Optical Q-Check Variant – VIU13: Camera resolution (Image size): Focus distance: Colour of integrated lighting: Individual camera lighting by Loxi-Lighting Module Industry sectors: Automotive Agricultre Wood industry Research & Education Dimensions in mm (L x W x H): Camera without plug: Weight: Camera with integrated lighting: Electrical supply: Rated current (max): Nominal voltage: Wide range voltage input: Processor: i.MX8M QUAD-Core Cortex A53, 1.5 GHz + Cortex M4 266 MHz 4 GB DDR3 RAM – 16 GB eMMC (Can be extended on request) Operating system: Embedded Linux...