Catalogs >
Evident - Olympus Scientific Solutions >
Phased Array Probes and MXU Software for DGS

Phased Array Probes and MXU Software for DGS
2Pages

Catalog excerpts

Phased Array Probes and MXU Software for DGS - 1

Phased Array Solution Service Inspection Phased Array Probes and MXU Software for DGS Quick, Easy Setup and Calibration: DGS and Atlas Series Probes MXU software version 4.4 incorporates the distance gain sizing (DGS) method to streamline your inspections when using an OmniScan® MX2 or SX flaw detector. The DGS1 series and A24 Atlas series probes were created to support the DGS functionality in MXU v. 4.4 software. Both probe series can be used in a range of applications, such as the inspection of welds (including welds with limited access), bridge pins and bolts, and stress corrosion cracking. When using these probes, the software can be set up to perform DGS code compliant inspections in just a few simple steps.

Open the catalog to page 1

Phased Array Probes and MXU Software for DGS - 2

DGS1 Series Probe Features • Inspect thick surfaces: manual weld inspection of surfaces 6.35 to 19 mm (0.25 in. to 0.75 in.) thick, including butt joints, corner joints, and tee joints, using a 40° to 70° shear wave sectorial scan. • Cover a range of thicknesses: available in 2.0 and 4.0 MHz versions. • Work in tight spaces: low-profile probe-and-wedge combination for contact angle beam inspection. • Familiar case style: standard AMR case with phased array technology. • Inspect: welds, stress corrosion cracking (SCC), and solid and hollow heavy steel forgings. A24 Atlas Series Probe...

Open the catalog to page 2