Industrial Scanners brochure
36Pages

Industrial Scanners and Accessories

Phased Array Inspections Ultrasonic Transducers Probe Catalog WEDGES, CABLES, TEST BLOCKS Phased Array Probes and Wedges • Solution-Specific Probes • Angle Beam Probes • Immersion Probes • Integrated Wedge Probes • Curved Array Probes • Wedges Contact Dual Element Angle Beam Shear Wave Delay Line Protected Face Immersion TOFD High Frequency Atlas European Standard Scanners are usually not supplied with probes and wedges. For phased array probes and wedges, refer to the Phased Array Probes and Wedges catalog; for UT probes and wedges, refer to the Ul

Table of Contents Scanner Technical Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Scanner Application Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Scanner Encoder Connector Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4...

The capacity to accurately position probes according to the surface being inspected greatly influences inspection quality. Depending on the application, constraints can arise that make probe positioning difficult. Olympus offers a wide range of industrial scanners and accessories to assist inspectors in their work while providing optimal data acquisition. Some of the applications covered by our scanner product line are weld inspection, corrosion mapping, and aerospace. Supported technologies include phased array, conventional ultrasonic, time-of-flight diffraction (TOFD), eddy current, and...

The VersaMOUSE™ scanner is designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE scanner can perform an encoded one-line scan followed by indexing the position in the perpendicular direction. Another one-line scan can then be performed and juxtaposed to the previous scan. This process is repeated to produce a complete 2D map of the area of interest. The scanner's adjustable yoke is easy to set up on an IHC-type wedge using standard attachment...

Wire Encoder Mini-Wheel™ Small Footprint Encoder The Mini-Wheel™ encoder is compatible with the HST-X04 scanner as well as Olympus standard PA wedges. It can be mounted directly on the wedges using the included bracket kit or using Evident's universal holder for increased versatility and ease of use. Magnetic Wheel (standard with universal holder package) Maximum adherence on ferromagnetic surfaces. P/N: ENC1-A-MagWheel-V2 [U8775290] Rubber Wheel (standard on stand-alone ENC1) Ideal for nonferromagnetic surfaces with temperatures up to 150°C. P/N: ENC1-A-Pwheel [Q1500046] Mounting Bracket...

The new HST-Lite scanner is the perfect choice for cost-effective, one-channel TOFD inspections when signal quality is important. The combination of magnetic wheels and spring-loaded probe holders offer the stability required to perform high-quality, one-line inspections. The scanner can be operated using only one hand and will attach to ferromagnetic surfaces even when in an upside-down position. The scanner's position can be encoded on flat surfaces or around the circumference of pipes as small as 4.5 in. (114.3 mm) OD. Adjustment of the scanner components can be performed without tools....

COBRA™ Scanner for Weld Inspection of Small-Diameter Pipes Features The COBRA™ manual scanner, combined with an OmniScan™ phased array flaw detector, is used to perform circumferential weld inspections on small-diameter pipes. The COBRA scanner holds up to two PA probes for inspections on pipes with outside diameters ranging from 0.84 in. (21 mm) to 4.5 in. (114 mm). With its very slim design, this manual scanner inspects pipes in limited ac cess areas where minimal clearance is required. Adjacent obstructions, such as piping, supports, and structures, can be as close as 12 mm (0.5 in.)....

The HSMT-Compact” manual one-axis encoded scanner is designed for maintenance weld inspection. It is small, light, and versatile and can be used with up to four probes on plates as well as for circumferential scans on pipes as small as 4.5 in. (114.3 mm) OD. The scanner width can be adjusted and the frame can be extended outside the limit of the wheels to provide a configuration that is suitable for hard-to-reach places, such as pipe-to-component welds. Options Divisible Cable Conduit See the accessories section on page 31. Couplant-Feed Units See the accessories section on page 34. Remote...

The HSMT-Flex™ scanner is our most capable semiautomated scanner for one-axis encoded inspection of circumferential welds. The scanner comes standard with four of our next-generation probe holders, accommodating a total of eight probes with the addition of four optional probe holders. To provide optimal efficiency and detection capabilities, the mounted probes can be phased array (PA), conventional UT, or a combination of these technologies. Time is saved when switching and adjusting the probes and wedges thanks to the simplified probe holder design with toolless mechanisms and a vertical...

AxSEAM™ Long Seam Weld Scanner Features f Adapts easily to wide range of pipe diameters: - Longitudinal welds: 152.4 mm (6 in.) OD up to flat - Circumferential welds: as small as 254 mm (10 in.) OD with 4 probes and 114.3 mm (4.5 in.) OD with 2 probes f ScanDeck™ module communicates directly with an OmniScan™ instrument: - One button is used to start the acquisition on any OmniScan™ instrument and the other button activates the laser guide - LED status indicators alert to loss of coupling and when the scan speed has exceeded the maximum to prevent missed data* f Innovative probe holders...