Standalone UPS 20-60kVA Power Tower series

Product catalog summary

Product Introduction: The Power Tower series UPS is designed for data centers, telecommunication systems, IT networks, and critical systems, especially in areas with unreliable energy supply. It features double conversion technology and is controlled by dual DSP microprocessors, ensuring maximum protection and energy savings. The design supports both three-phase and single-phase power supplies.

Features: Key features include DSP microprocessor control, optional external battery numbers, LCD and LED displays, customizable charging current, intelligent charging mode, EPO function, and intelligent monitoring. The UPS supports flexible operation with three-phase input and output, and can convert to single-phase output if needed.

Technical Advantages: The UPS employs a two-stage, three-stage intelligent charging mode for quick recharge and battery life extension. Charging current is dynamically allocated, and the system can switch between charging modes automatically. An EPO button is available for emergency shutdowns.

Display and Monitoring: The UPS uses both LCD and LED displays to provide clear information on operational parameters such as voltage, frequency, load, battery capacity, and internal temperature.

Technical Data: The UPS models PT30L and PT40L have power ratings of 30KVA and 40KVA, respectively, with efficiencies of ≥94.5% in online mode. They comply with safety standard EN 62040-1 and EMC standard EN 62040-2, and are CE certified. The UPS operates within a temperature range of 0°C to +40°C and supports various communication interfaces including RS232 and Ethernet.

Standards and Certifications: The UPS meets safety and EMC standards, with CE certification. It has a degree of protection rated at IP20 and can operate at altitudes up to 1000 meters without de-rating.

Environmental and Operational Parameters: The UPS supports a relative humidity of <95% non-condensing and has a power factor of ≥0.99. It can handle overloads up to 150% for 1 minute before shutdown.

Battery and Communication: The UPS uses lead-acid maintenance-free batteries with a voltage range of ±192VDC, and a maximum battery charger current of 10A. Communication options include SNMP, USB, and parallel kits.

Catalog excerpts

Standalone UPS 20-60kVA Power Tower series-1

Uninterruptible Power Systems For Business-Critical Continuity

Open the catalog to page 1

Standalone UPS 20-60kVA Power Tower series-2

Energy Saving Product Introduction: The Power Tower series UPS is an ideal solution for protecting data centers and telecommunication systems, IT networks and critical systems especially when the poor energy supply hampers the continuity of activities and services. The Power Tower series UPS is designed and built using state of the art technology and modern components. It has double conversion technology and it is controlled by double DSPs (Digital Signal Processor) microprocessor, to provide maximum protection to the powered loads with no impact on downstream systems, and optimized energy savings....

Open the catalog to page 2

Standalone UPS 20-60kVA Power Tower series-3

Technical advantages: Flexible operation model Intelligent charging mode The series UPS is three phase input and three phase output, and the input current is three phase balanced. In order to balance the load of the three-phase power grid, the output can be changed into single phase output. The UPS adopts advanced two-stage, threestage charging mode.The ﬁrst stage is constant high current charging, fast charging up to 90% capacity;The second stage is constant voltage charging, can activate the electricity and fully ﬁll the battery.The third stage is ﬂoating charging mode. This allows for quick...

Open the catalog to page 3

Standalone UPS 20-60kVA Power Tower series-4

Technical data Model INPUT Rated voltage Voltage tolerance Rated frequency Power factor THDi Rated voltage Voltage tolerance Rated frequency Overload Capability THDu Crest factor BATTERIES Type Voltage Lead-acid maintenance-free batteries ±192VDC(±216,±240 Setable) Battery charger COMMUNICATION Interfaces Ethernet adapter RS232 SNMP/Dry Contact /USB/Parallel Kits (Optional) Local communication software Local View EFFICIENCY Online mode ENVIRONMENT Ambient service temperature 0 °C to +40 °C (15 °C to 25 °C for maximum battery lifetime) Relative humidity Maximum altitude UPS CABINET Dimensions...

Open the catalog to page 4