*mydirectindustry

Smart V1.0

1 / 4 PagesView full catalog

Smart V1.0

Product catalog summary

Features

Microcontroller-based charger with touch screen display.
Manual and automatic switching with programmable float/boost charge changeover.
Constant voltage and current limited with high reliability using thyristors and natural cooling.
Includes mains transformer with separate windings and input/output MCB protection.
Optional battery inside cabinet and easy maintenance.

Protection and Alarm

Protection against overload/short circuit, over temperature, and over/under DC voltage.
Includes input/output fuse or breaker and optional dropping diode.
Ground alarm feature included.

Applications

Suitable for power generation plants, transmission and distribution, substations, continuous process industries, oil & gas, petrochemical industries, and rail transport.

Indications

Status indicators for mains on, run, BAT MCB on, load MCB on, float, boost, manual, mains fault, output under voltage, output over voltage, and ground fault.

Specifications

Nominal input voltage: 220VAC±10% 1phase (customizable).
Frequency: 50/60Hz±5%.
Output voltage: 24V, 30V, 48V, 50V with a range of 100%-150% nominal voltage.
Output current: 10A, 15A, 20A with ripple voltage within 2% RMS at full load.
Current limited to 110% of nominal current.
Output regulation: ±1% for 198 to 242VAC supply voltage.
Analog measurements include output and load voltmeter and amperemeter.
Local alarms for mains fault, output under voltage, output overvoltage, and ground fault.
Mode of operation: Boost/float, Manual/Automatic.
Protections include overload/short circuit, charger fuses, battery and load breaker, and over temperature protection.
Available languages: English, Spanish (optional).
Degree of protection: IP20.
Color: RAL7035.
Operating temperature: 0℃ to 45℃, up to 55℃ with power derating.
Humidity: 10% to 95% non-condensing.
Installation height: Up to 1000m over sea level, up to 3000m with power derating.
Connection: Bottom input/output.

General Information

Cabinet dimensions: Battery inside cabinet - 1100H*580W*600D; Battery outside cabinet - 350H*440W*500D.

Catalog excerpts

power your applications power your applications uXcel - 30VDC10AMPS

Open the catalog to page 1

The protection of electrical load against power failure is often carried out by battery backed up DC power supplies, providing electrical energy to important loads during mains supply, as well as during mains failure. The Smart charger equipment provides an advanced solution with Small substations and power plants system. It combines reliability from naturally cooled thyristor-based rectifier with proven microprocessor control technology to offer the best performances in any electrical and environmental conditions. It's suitable for charging VRLA sealed lead acid, maintenance free nickel-cadmium...

Open the catalog to page 2

Applications • Power generation plants • Transmission and Distribution • Substations • Continuous process industries • Oil & Gas and Petrochemical industries • Rail transport The display and operation unit mounted on the front door of the touch screen display to indicate the status and the measurements in plain text, as well as 11 LED controlled by the monitoring and control unit. In addition, the front panel is equipped with Boost- float change-over switch and manual-automatic change-over switch, which are used to switch charging mode; it is equipped with circuit breaker and fuse to protect...

Open the catalog to page 3

Open the catalog to page 4

All EverExceed Industrial Co. Ltd catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list