RMI-P Series Inverter Technical Data (220V AC OUTPUT): Rated Power Hot-Swap HF Modular Inverter In Parallel (220VAC Output) RMI-P Series 1-24KVA Product Porm Bypass Input Range 176～264(Can be adjustable according customer) 5～12ms Rate Output Voltage Rate Output Frequency Load Regulation Frequency Accuracy Crest Ratio Waveform Distortion Bypass Switch Time Resistance full load＜3%，nonlinear full load＜5% Dynamic Response Voltage transient range＜3%, transient response recovery time≤60ms（load from 0 to 100%） Parallel Uneven Flow Digital control: it adopts 32-bit DSP full digital and high-frequency SPWM technology, featuring strong anti-interference ability, fast calculation speed, high intelligence, accurate control precision and pure output waveform. ＜3% rated current RMS Load current ＜105%, continuous work Load current 105～125%, continuous work 10min shutdown Overload Capacity Load current 125～150%，continuous work after 1min shutdown N+1 parallel redundant design: it can form an N+1 parallel redundant power supply system. The modules are backup each other, with high reliability and flexible configuration. No master-slave parallel technology: the operation and parallel connection of each module are independently controlled by the built-in DSP, no single point of failure, independent flow between modules. Input connection protection, Protection Function output short circuit protection, over temperature protection Module built-in bypass: users can choose inverter priority or bypass priority. Communication input under voltage and over-voltage protection, output overload protection, Communication Interface With hot plugging: no need to do any parameter setting and operation, plug and play, the module automatically enters the normal working state, maintenance and replacement is simple and fast. Insulation Strength Monitoring management: indicator panel, fault sound and light alarm, RS485 communication interface and fault dry contact. Operating Ambient Protection function: it has the functions of input over-voltage, output over-voltage, overtemperature, short-circuit and so on. High power density: 1/2 19〞 width design, the volume is only half the width of the conventional inverter, saving space and convenient parallel. Work Environment Temperature Transport And Storage Temperature Relative Humidity