Catalogs >
EverExceed Industrial Co. Ltd >
Ni-Cd battery SEBM series

Ni-Cd battery SEBM series
13Pages

Catalog excerpts

Sealed NiCd - Low Maintenance SEBM Pocket plate Range 10-1100Ah

NiCd Pocket Plate Range Easy storage and installation Nickel-cadmium block batteries are quick and easy to install as original equipment and may be stored for many years in a discharged state under correct conditions. On installation a simple bolted connector enables the battery to be rapidly commissioned. Assured reliability Ni-Cd is equally dependable in controlled city environments or harsh, unpredictable conditions in the world's most remote and unpopulated areas. Sealed NiCd - Low Maintenance SEBM Pocket plate Range 10-1100Ah The block battery - for dependability The wide range of low,...

Open the catalog to page 2

NiCd Pocket Plate Range The cells are welded together to form rugged blocks of 1-6 cells depending on the cell size and type. The EverExceed Single Cell ranges fully comply and exceed the IEC 60623 standard requirements. Performance Data Many nickel-cadmium batteries are used in stationary standby power applications where discharges occur infrequently and the battery is continuously charged by a float or constant potential charge. Under these circumstances there is a modification in the level of the discharge curve and allowances must be made for this when sizing the battery. In order to...

Open the catalog to page 3

NiCd Pocket Plate Range Battery Charging It is recommended to use Constant Voltage method of charging for Nickel Cadmium Batteries, usually with current limitation to C/5 or C/10. Charging voltages must be regularly checked. To optimize the battery performance, it is necessary to ensure that the voltage is kept within the following limits: Batteries can be charged in: ◆ A higher voltage will reduce the charge duration and increase the efficiency of recharging but may increase water consumption. constant voltage mode with load connected or constant current or declining current mode when load...

Open the catalog to page 4

NiCd Pocket Plate Range NiCd Pocket Plate SEBM Range Electrical Specifications & Dimensions Nominal Capacity Cell Type Voltage (C5 Ah) (V) Dimensions (mm/inch) Weight (kg/lb.) Terminal Without Electrolyte Cell Case Material With Electrolyte EverExceed SEBM batteries fulfil all requirements specified by IEC publication 60623. Transparent case optional. VRNC 04 Copyright © EverExceed Corporation. All rights reserved.

Open the catalog to page 5

NiCd Pocket Plate Range Discharge Data Table Discharge performance data after fully charged by constant current according to IEC60623 Available amperes at +20°C ±5°C(+68°F ±9°F) Discharge Time in Hours Cell Type Discharge Time in minutes VRNC 05 Copyright © EverExceed Corporation. All rights reser

Open the catalog to page 6

NiCd Pocket Plate Range Discharge Data Table Discharge performance data after fully charged by constant current according to IEC60623 Available amperes at +20°C ±5°C(+68°F ±9°F) Discharge Time in Hours Cell Type Discharge Time in minutes VRNC 06 Copyright © EverExceed Corporation. All rights reser

Open the catalog to page 7

NiCd Pocket Plate Range Discharge Data Table Discharge performance data after fully charged by constant current according to IEC60623 Available amperes at +20°C ±5°C(+68°F ±9°F) Discharge Time in Hours Cell Type Discharge Time in minutes VRNC 07 Copyright © EverExceed Corporation. All rights reser

Open the catalog to page 8

NiCd Pocket Plate Range Discharge Data Table Discharge performance data after fully charged by constant current according to IEC60623 Available amperes at +20°C ±5°C(+68°F ±9°F) Discharge Time in Hours Cell Type Discharge Time in minutes VRNC 08 Copyright © EverExceed Corporation. All rights reser

Open the catalog to page 9

NiCd Pocket Plate Range Calculation Methods Information required for battery capacity calculation The following information needed for a precise battery capacity calculation: Nominal voltage of the system Load current required Maximum voltage (for charging) Minimum voltage Battery layout and available space Physical condition Backup time required Temperature range Float Voltage Operation In these conditions the float voltage, being the voltage at which the general load circuit will operate, then a decision will have to be reached on the cell float voltage needed to maintain the battery in...

Open the catalog to page 10

Open the catalog to page 11

NiCd Pocket Plate Range Disch arg in g Curves of SEBM Ser ies (-18℃) Volta ge(V) 1 .5 0 Ca pacity Perce ntage (% ) Temperature Effect Curves of SEBM Series VRNC 11 Copyright © EverExceed Corporation. All rights reserved.

Open the catalog to page 12