1. Catalogs
  2. Everblue
  3. SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A

SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A

SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A

SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A

Product catalog summary
Technical Features:
The FILBLUE FBL2000A is an industrial self-cleaning filter made from fiberglass (FRP). It supports various inlet/outlet sizes ranging from 2" to 6" VICTAULIC connections. The filter operates continuously with micron ratings of 50, 80, 125, 200, 300, 500, and 800, achieving 90% efficiency. It is highly efficient on non-compressible particles and moderately efficient on compressible and light particles.
Design Data:
The filter operates within a minimum working pressure of 0.5 bar and a maximum of 6 bar, with a hydraulic test pressure of 9 bar. It can handle temperatures up to 50°C and pH levels between 5 and 8. The maximum diameter for inlet particles is 3 mm, and it can manage total suspended solids up to 50 mg/l for smaller microns and 100 mg/l for larger microns. The maximum pressure difference allowed is 1 bar.
Power Requirements:
The filter requires 12 Volt DC power, consuming 120 Watts, and the solenoid valve also operates at 12 Volt DC. It requires air pressure between 2 and 8 bar.
Applications:
The FILBLUE FBL2000A is suitable for various applications including water and sea water filtration, prefiltration for water treatment plants, process water, evaporative cooling towers, heat exchangers, irrigation, aquaculture, protection of spray nozzles, and prefiltration for ultrafiltration (UF) and reverse osmosis (RO) plants.
Compliance and Standards:
The filters comply with the P.E.D. 2014/68/EU directive and are designed according to BS EN 13923 2005. They are free from the "CE" stamp as per the directive's article 4, paragraph 3, and are intended for use with non-dangerous fluids.
Product Variants:
The document lists various product codes for different configurations of the FILBLUE FBL2000A, detailing filtering surface area, connection sizes, micron ratings, flow rates, cleaning flow rates, cleaning times, and power requirements. The flow rate varies significantly with the connection size and micron rating, ranging from 27,000 l/h to 198,000 l/h.
See more

Catalog excerpts

SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A-1

PARMA - ITALY https://www.everblue.it Industrial self cleaning filters SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A Link to product's PDF drawing TECHNICAL FEATURES: Type 2" VICTAULIC, 3" VICTAULIC, 4" VICTAULIC, 5" VICTAULIC, 6" VICTAULIC Continuous flow Efficiency on non compressible particles Efficiency on compressible particles Efficiency on light particles DESIGN DATA Min working pressure Hydraulic test pressure Max diameter inlet particles Max total suspended solids POWER Electric power Electric power solenoid valve

 Open the catalog to page 1
SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A-2

PARMA - ITALY https://www.everblue.it Industrial self cleaning filters SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A APPLICATIONS Water Sea water Prefiltration for water treatment plants Process water Evaporative cooling towers Heat exchangers Irrigation Aquaculture Protection of spray nozzles Prefiltration for ultrafiltration (UF) plants Prefiltration for reverse osmosis (RO) plants Code Flow Connectio Connecti Micron on drain rate n In/Out Cleaning flow rate Cleaning time Power needed European Community members only. These filters are free of the "CE" stamp since they are included...

 Open the catalog to page 2
SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A-3

PARMA - ITALY https://www.everblue.it Industrial self cleaning filters SELF CLEANING FILTERS WITH SUCTION NOZZLES Flow Connectio Connecti Micron on drain rate n In/Out Cleaning flow rate Cleaning time Power needed

 Open the catalog to page 3
SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A-4

PARMA - ITALY https://www.everblue.it Industrial self cleaning filters SELF CLEANING FILTERS WITH SUCTION NOZZLES FILBLUE FBL2000A SELF CLEANING FILTERS CODE LIST Model Connection IN/OUT 2" VICTAULIC 3" VICTAULIC 4" VICTAULIC 5" VICTAULIC 6" VICTAULIC Approximate picture. End caps and height's choice will lead to the assembly of a product which could differ from those shown in figure Flow rate chart available on www.everblue.it by choosing microns gradient and connections and selecting specific product data sheet

 Open the catalog to page 4

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.