Solution for filling machines
2Pages

Introduction The application needs for the use of a GWC controller and of AC synchronous servo-motors with 50 polar torques and integrated electronics of SM1A series. DFM solution for digital management of linear or rotary machine’s llers Components’ scheme • Motor type for filler’s movement: servo-motor with high number of poles and integrated electronics. Digital Management of llers ● Main characteristics: Product sensor √ Different mode of load measurement Incremental Encoder GWC Digital inputs DP / Devicenet √ Product presence (no product no lling) √ Compact size Remote Technical Support • Homing function of the filler: available in different modes: - homing sensor reading; - load measurer reading; - mechanical stop control. • Presence of the product function: it can be activated at a specific angle of the carousel. If the product hasn’t been detected (GWC input), the filler stops until the following carousel orientation. √ Fast and easy conguration • Cam profile of the filler: the profile of electronic cam can be set up by a specific software interface or directly from PLC/ HMI -> GWC data area. √ Programmable dosing prole • Full speed of the filler’s motor: each filler can reach a 1500 rpm speed. √ Remote support on Web √ Easy integration with machine’s PLC (if required) ELETTRONICA PER AUTOMAZIONE INDUSTRIALE Via del Commercio, 2/4 -9/11 Loc. S. Grato - Z.I. 26900 - LODI (LO) - Italy Tel. 0039 0371 412318 - Fax 0039 0371 412367 email infoever@everelettronica.it www.everelettronica.it • Absolute Encoder option: it is supported the use of an absolute encoder with CANopen interface to survey the position of the carousel during the starting. Operating mode The “DFM Configurator”, beside allowing a simple and fast configuration of the system, provide the possibility of a remote support on Web. Here below are described the characteristics of the fillers control solution Digital Fillers Management: • Number of controllable fillers: can be created and controlled systems from 1 to 30 fillers. GWC controller can operate as isolated standalone unit or interface with machine’s PLC through the following bus: • Profibus DP • Devicenet • Modbus RTU • Ethernet The whole system can be configurated in a fast and simple way thanks to specific configuration software for Windows operation systems (DFM Configurator) supplied by Ever Elettronica and integrated in IDE T.R.I.P.O.S. GW. Feature’s detail

IDE T.R.I.P.O.S. GW software with integrated DFM Detailed scheme Product sensor Incremental Encoder Available models GWC Digital inputs DP / Devicenet Remote Technical Support Required devices for the llers’ control Type of device Code Incremental encoder Absolute encoder (optional) Controller with complete preinstalled Digital Filling Management software. The controller Description manages up to 30 fillers (H version) or up to 10 fillers (L version). Servo-motor and drive integrated in only one device for the movement of each filler. The system can be built in direct drive. USB key with...