PHOSPHATING MARKET
8Pages

PHOSPHATING MARKET

'>euspray by Eirospray spray and fite technology SL

by Etrospray spray and tilts' technology SL PHOSPHATING MARKET ZPL Series SINGLE AND DOUBLE SPRING PIPE CLAMPS Characteristics Pipe clamps “ZPL” series are designed to ensure easy installation and reduced maintenance time. The assembly clamp-nozzle-nut is mounted on the collectors only with the use of one or two elastic brackets in AISI. Everything by hand, without any tools, installing the clamp, orienting the nozzle tip and thanks to retainer locks in the desired position. The clamps can be installed on pipes and 1-1/2”. The realization of clamps in plastic material, polypropylene...

PHOSPHATING MARKET oeuspray* bg Eu-ospray spray and fite tedmsfcjJjj 5L HANDLOCK QUICK THREAD CLAMPS Characteristics Handlock clamps have the advantage of can be installed and removed without tools and with the use of one hand decreasing the timing related to maintenance. These clamps mate perfectly with the other Euspray products line like the threaded spheres and the nozzles of the DPL series. Materials Body: polypropylene with glass fiber, stainless steel plugs. O-ring: EPDM (VITON on request) Max. Working Temperature: 60°C Max. Working pressure: 7 bar PSNODO ADJUSTABLE...

PHOSPHATING MARKET by Etrospray spray and tilts' technology SL Materials Body: polypropylene loaded with talc O-ring: ADFLEX DPL ORIENTABLE BALL NOZZLES Characteristics The ball adjustable nozzle is easily mountable on the clamps ZPL series and through NPL locking ring. Available with a wide range of flow rates ranging from 3.9 to 22.3 l / min at 3 bars, the standard spray angle is 60°. Customized versions are available on request and with a capacity on demand and eventually can be supplied with spray tip in stainless steel or other material on request. It’s the ideal product for rinsing...

PHOSPHATING MARKET icuspray EDU series EJECTORS Characteristics Euspray ejectors allow to keep in movement liquid avoiding sedimentation of the solid particles present. The EDU series has been designed following the Venturi principle and have a ratio of about 1: 4 between the liquid inlet (pumped) and the outlet from the ejectors. Mainly they are produced in Polypropylene with BSPT male connections, but on request are available female and steel connections. Materials Polypropylene (others on request) Max. Working temperature: 75°C (Polypropylene)

by Etrospray spray and tilts' technology SL PHOSPHATING MARKET FFA series QUICK COUPLERS Characteristics The quick couplers of the FFA series are mainly used in the lines of pretreatment surface to facilitate and speed up maintenance operations. The couplers are made of polypropylene reinforced with stainless steel levers for guarantee excellent mechanical and chemical resistance to the corrosive environments present in the superficial pretreatment. Materials Body: polypropylene reinforced with fiberglass. Levers: sintered Aisi304 Seal: EPDM (VITON on request)

Australia Austria Chile France Italy Poland Russia South Africa Spain UK US